I am porting a working kernel extension IOKit driver to a DriverKit system extension. Our device is a PCI device accessed through Thunderbolt. The change from IOPCIFamily to PCIDriverKit has some differences in approach, though. Namely, in IOKit / IOPCIFamily, this was the correct way to become Bus Leader: mPCIDevice->setBusLeadEnable(true); // setBusMasterEnable(..) deprecated in OS 12.4 but now, PCIDriverKit's IOPCIDevice does not have that function. Instead I am doing the following: // Set Bus Leader and Memory Space enable uint16_t commandRegister = 0; ivars->mPCIDevice->ConfigurationRead16(kIOPCIConfigurationOffsetCommand, &commandRegister); commandRegister |= (kIOPCICommandBusLead | kIOPCICommandMemorySpace); ivars->mPCIDevice->ConfigurationWrite16(kIOPCIConfigurationOffsetCommand, commandRegister); But I am not convinced this is working (I am still experiencing unexpected errors when attempting to DMA from our device, using the same steps that work for the kernel extension). The only hint I can find in the online documentation is here, which reads: Note The endpoint driver is responsible for enabling the Memory Space Enable and Bus Master Enable settings each time it configures the PCI device. When a crash occurs, or when the system unloads your driver, the system disables these features. ...but that does not state directly how to enable bus leader status. What is the "PCIDriverKit approved" way to become bus leader? Is there a way to verify/confirm that a device is bus leader? (This would be helpful to prove that bus leadership is not the issue for DMA errors, as well as to confirm that bus leadership was granted). Thanks in advance!

In iPadOS 17.7 my driver shows up in settings just fine. After recompiling with Xcode 16 and installing my app (containing my driver) on iPadOS 18, the app shows up in settings but the driver-enable button is missing from Settings. When I plug-in my custom USB device, the app cannot detect it and I am left with no way to manually enable the driver, as I did in the previous version of iPadOS.

My APP is not a game APP but I entered game mode when opening the APP on IOS 18. Setting GCSupportsGameMode = false is also invalid

Hello. In the case of certain apps, I confirmed that when I connected the Bluetooth of the vehicle, local notification is activated in the app and the app processor automatically runs when Bluetooth is connected. How can I do that? Thank you

Hello, I'm developing a custom AU plugin that needs to connect to a DriverKit driver. Using the DriverKit sample (https://github.com/DanBurkhardt/DriverKitUserClientSample.git), I was able to get a standalone app to connect to the driver successfully. However, the AU plugin, running in a sandboxed host, isn't establishing the connection. I’ve already added the app sandbox entitlement, but it hasn’t helped. Any advice on what might be missing? TIA!

Is there an option to create a macOS filter driver for the IONVMeFamily Driver that would enable sending NVMe Admin commands( likes security send , security receive, Firmware download)? This approach would allow us to reuse the IO path provided by the family driver.

Hello everybody, Since macOS 15, the systemextension allow in changed as switch style and put in the "Login items & Extensions". I know the URL navigating to here, which is: x-apple.systempreferences:com.apple.LoginItems-Settings.extension But the extension options we need to scroll deep down and we need to click the "!" to open it. I want to open the finally window for user can easily see it and enable it. Please tell me how. Appreciate!!

Hi everyone, Are there any new updates on communicating with iPhones via USB-C without needing an MFi chip, especially with the iPhone 15 or upcoming iPhone 16? I'm developing a custom accessory and wondering if the switch to USB-C has introduced any new possibilities for data communication without going through the MFi program. Thanks!

I have two different USB devices with different vendor IDs I would like to connect to. I submitted two separate requests for the com.apple.developer.driverkit.transport.usb entitlement for each vendor ID. However I am noticing the provisioning profile only has one of the vendor IDs. How do I submit a request for the USB Transport entitlement to support more than one vendor ID? I'm new to writing a DriverKit driver, so is this even possible?

We are looking for a solution (API, Frameworks) that would allow us to block any type of external device, including storage devices, HIDs, network adapters, and Bluetooth devices according with dynamic rules that comes from management server . This feature is important for endpoint security solutions vendors, and it can be implemented on other platforms and older versions of macOS using the IOKit framework and kexts. I have found one solution that can control the usage only of "storage" devices with the EndpointSecurity framework in conjunction with the DiskArbitration framework. This involves monitoring the MOUNT and OPEN events for /dev/disk files, checking for devices as they appear, and ejecting them if they need to be blocked.. Also, I have found the ES_EVENT_TYPE_AUTH_IOKIT_OPEN event in EndpointSecurity.framework, but it doesn't seem to be useful, at least not for my purposes, because ES doesn't provide AUTH events for some system daemons, such as configd (it only provides NOTIFY events). Furthermore, there are other ways to communicate with devices and their drivers apart from IOKit. DriverKit.framework does not provide the necessary functionality either, as it requires specific entitlements that are only available to certain vendors and devices. Therefore, it cannot be used to create universal drivers for all devices, which should be blocked. Any advice would be greatly appreciated!

I would like to write a driver that supports our custom USB-C connected device, which provides a serial port interface. USBSerialDriverKit looks like the solution I need. Unfortunately, without a decent sample, I'm not sure how to accomplish this. The DriverKit documentation does a good job of telling me what APIs exist but it is very light on semantic information and details about how to use all of these API elements. A function call with five unexplained parameters just is that useful to me. Does anyone have or know of a resource that can help me figure out how to get started?

my carplay is not sinking with iphone after up dating to iOS 18. I have honda ZRV. What is the issue and how to resolve?

Hi everyone. I have an iOS application for work with an MFi-certified device connected to the iPhone via USB-C. When I launch the app and attach the device, I can create an EASession and use the InputStream and OutputStream as usual. But if I attach the device before launching the app I can't use the InputStream and OutputStream, because the hasBytesAvailable and hasSpaceAvailable properties are always false. The NSStreamEventHasBytesAvailable and NSStreamEventHasSpaceAvailable events will never be triggered. After I re-attach the device, the streams open fine and I can interact with the device. What can be wrong with the case of attaching the device before the app launches?

Since updating to 18.0 & 18.1 I’ve have issues with CarPlay connected via usb, phone calls specifically where people would say I sound distant and robotic distortion. Tried other vehicles same issue new usb same issue, tried all recommendations with no success some one who refused to update theirs worked well without any issues I’m currently facing. Any suggestions or there gonna be an update that addresses this issue ?

Hello Currently, we are developing an application that collects measurement data from devices via USB port but we have some problems regarding input buffer size that might reduce the reading speed. The data size is quite big (~1.5 million bytes). For every read action, the app will check the available size in the input buffer by command: ioctl(serialPort.hHandle, FIONREAD, readBuffSize) Then that size will be passed as the desired size for the read command. Between read actions, there will be a short sleep (1 - 3 ms). Please confirm some points below: Regardless of the size of the measure data, the available size will only be up to 1020 bytes, is it expected? Is the above size OS defined or driver defined? Could we increase it? As we checked, there were some missing bytes between the measure data and the actual read data. Is there any chance that the data in the input buffer be overwritten while the read thread is in sleep? Any recommended technique that can increase reading speed while still maintaining the integrity of the data? Tested OS: Sonoma 14.5

Environment iPad：10th iOS：18.1 Printer：EPSON PX-S730 Problem In iOS18.1, When printing with AirPrint, PrintCenter is no longer displayed on AppSwitcher. In iOS17, PrintCenter was displayed on AppSwitcher. Question Is this a specification change? I would like to know if there is a way to check PrintCenter on AppSwitcher in the same way as iOS17. Ref No information after iOS18.1 update. https://support.apple.com/ja-jp/109349 There is no mention of AirPrint updates in the AppleDeveloper release notes. https://developer.apple.com/documentation/ios-ipados-release-notes/ios-ipados-18-release-notes https://developer.apple.com/documentation/ios-ipados-release-notes/ios-ipados-18_1-release-notes

Hello, Apple developers. I have joined the MFi certification program. My Accessory to use USB HID IAP2 communication protocol and IOS devices connected, but in the first step, the Accessory to send the following data (0 XFF, 0 x55, 0 x02, 0 x00 to 0 xee, 0 x10) for IOS devices, but the IOS devices have no response, this is probably the reason why?

I am trying to add a few properties to an IOUSBHostDevice but the SetProperties is returning kIOReturnUnsupported. The reason I am trying to modify the IOUSBHostDevice's properties is so we can support a MacBook Air SuperDrive when it is attached to our docking station devices. The MacBook Air SuperDrive needs a high powered port to run and this driver will help the OS realize that our dock can support it. I see that the documentation for SetProperties says: The default implementation of this method returns kIOReturnUnsupported. You can override this method and use it to modify the set of properties and values as needed. The changes you make apply only to the current service. Do I need to override IOUSBHostDevice? This is my current Start implementation (you can also see if in the Xcode project): kern_return_t IMPL(MyUserUSBHostDriver, Start) { kern_return_t ret = kIOReturnSuccess; OSDictionary * prop = NULL; OSDictionary * mergeProperties = NULL; bool success = true; os_log(OS_LOG_DEFAULT, "> %s", __FUNCTION__); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = Start(provider, SUPERDISPATCH); __Require(kIOReturnSuccess == ret, Exit); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ivars->host = OSDynamicCast(IOUSBHostDevice, provider); __Require_Action(NULL != ivars->host, Exit, ret = kIOReturnNoDevice); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = ivars->host->Open(this, 0, 0); __Require(kIOReturnSuccess == ret, Exit); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = CopyProperties(&prop); __Require(kIOReturnSuccess == ret, Exit); __Require_Action(NULL != prop, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); mergeProperties = OSDynamicCast(OSDictionary, prop->getObject("IOProviderMergeProperties")); mergeProperties->retain(); __Require_Action(NULL != mergeProperties, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); OSSafeReleaseNULL(prop); ret = ivars->host->CopyProperties(&prop); __Require(kIOReturnSuccess == ret, Exit); __Require_Action(NULL != prop, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); os_log(OS_LOG_DEFAULT, "%s : %s", "USB Product Name", ((OSString *) prop->getObject("USB Product Name"))->getCStringNoCopy()); os_log(OS_LOG_DEFAULT, "%s : %s", "USB Vendor Name", ((OSString *) prop->getObject("USB Vendor Name"))->getCStringNoCopy()); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); success = prop->merge(mergeProperties); __Require_Action(success, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = ivars->host->SetProperties(prop); // this is no working __Require(kIOReturnSuccess == ret, Exit); Exit: OSSafeReleaseNULL(mergeProperties); OSSafeReleaseNULL(prop); os_log(OS_LOG_DEFAULT, "err ref %d", kIOReturnUnsupported); os_log(OS_LOG_DEFAULT, "< %s %d", __FUNCTION__, ret); return ret; }

I have been working on a multi-platform multi-touch HID-standard digitizer clickpad device. The device uses Bluetooth Low Energy (BLE) as its connectivity transport and advertises HID over GATT. To date, I have the device working successfully on Windows 11 as a multi-touch, gesture-capable click pad with no custom driver or app on Windows. However, I have been having difficulty getting macOS to recognize and react to it as a HID-standard multi-touch click pad digitizer with either the standard Apple HID driver (AppleUserHIDEventDriver) or with a custom-coded driver extension (DEXT) modeled, based on the DTS stylus example and looking at the IOHIDFamily open source driver(s). The trackpad works with full-gesture support on Windows 11 and the descriptors seem to be compliant with the R23 Accessory Guidelines document, §15. With the standard, matching Apple AppleUserHIDEventDriver HID driver, when enumerating using stock-standard HID mouse descriptors, the device works fine on macOS 14.7 "Sonoma" as a relative pointer device with scroll wheel capability (two finger swipe generates a HID scroll report) and a single button. With the standard, matching Apple AppleUserHIDEventDriver HID driver, when enumerating using stock-standard HID digitizer click/touch pad descriptors (those same descriptors used successfully on Windows 11), the device does nothing. No button, no cursor, no gestures, nothing. Looking at ioreg -filtb, all of the key/value pairs for the driver match look correct. Because, even with the Apple open source IOHIDFamily drivers noted above, we could get little visibility into what might be going wrong, I wrote a custom DriverKit/HIDDriverKit driver extension (DEXT) (as noted above, based on the DTS HID stylus example and the open source IOHIDEventDriver. With that custom driver, I can get a single button click from the click pad to work by dispatching button events to dispatchRelativePointerEvent; however, when parsing, processing, and dispatching HID digitizer touch finger (that is, transducer) events via IOUserHIDEventService::dispatchDigitizerTouchEvent, nothing happens. If I log with: % sudo log stream --info --debug --predicate '(subsystem == "com.apple.iohid")' either using the standard AppleUserHIDEventDriver driver or our custom driver, we can see that our input events are tickling the IOHIDNXEventTranslatorSessionFilter HID event filter, so we know HID events are getting from the device into the macOS HID stack. This was further confirmed with the DTS Bluetooth PacketLogger app. Based on these events flowing in and hitting IOHIDNXEventTranslatorSessionFilter, using the standard AppleUserHIDEventDriver driver or our custom driver, clicks or click pad activity will either wake the display or system from sleep and activity will keep the display or system from going to sleep. In short, whether with the stock driver or our custom driver, HID input reports come in over Bluetooth and get processed successfully; however, nothing happens—no pointer movement or gesture recognition. STEPS TO REPRODUCE For the standard AppleUserHIDEventDriver: Pair the device with macOS 14.7 "Sonoma" using the Bluetooth menu. Confirm that it is paired / bonded / connected in the Bluetooth menu. Attempt to click or move one or more fingers on the touchpad surface. Nothing happens. For the our custom driver: Pair the device with macOS 14.7 "Sonoma" using the Bluetooth menu. Confirm that it is paired / bonded / connected in the Bluetooth menu. Attempt to click or move one or more fingers on the touchpad surface. Clicks are correctly registered. With transducer movement, regardless of the number of fingers, nothing happens.

Hi, I am trying to develop MacOS application which will be connecting to USB devices and should be available in AppStore. So it must be Sandbox and probably I've to use permission com.apple.security.device.usb. I've following requirements: I need to detect USB devices with file system I need to have ability to upload & download files from this device I need to read device serial number I wonder if I can use IOKit for this and it will be compliant with AppStore rules or not?