I would like to know if macOS DEXT supports the following networking features: Tx/Rx Multiqueue, RSS, RSC, NS/ARP offload, PTP or packet timestamping and TSN. I couldn't find relevant documentation for these features in the Apple Developer Documentation. If they are supported, could you let me know which features are supported and how to find the corresponding official Apple documentation? Thanks

Hey, I'currently working on a Driver (and its App) for iPadOS (USB Device). I think have the right entitlements, as my driver gets installed with the app properly (after accepting it in the settings). It also gets loaded once the device is plugged in and so on. However the Kernel is not using the updated Version after I install a new Version of App and Driver to the iPad (at least most of the times). I'm verifying this by reading out the Logs via Console and the Driver prints its Build number on Start(). Sometimes it works like it should but I found no pattern. As far as I understand the iPad should automatically install the new Version of the Driver with the new App if its Build is different from the current one. I'm incrementing the Build of App and Driver automatically post-build so each build the iPad gets has its own Build number (This also works). Steps to reproduce: Cleaning Xcode Build Folder Unplugging the USB Device from the iPad. Building and Installing a new Version of the Driver and the App via Xcode (making sure the build number has changed) Plugging the USB back into the iPad Reading Console output of the iPad However it works (each time if I: Uninstall the app from the iPad manually or via Devices in Xcode Build and install the App via Xcode Open the Settings App and activate the Driver But uninstalling the App each time is taking a lot of time and manual Steps so I would like to fix this issue. Do you have any Ideas? Thanks, Bjarne

I've asked this question in Stackoverflow, but no response, so I ask for help in here. I follow this guide Debugging and testing system extensions, and try to debug my dext code. In the Attach the debugger to your system extension, it said After your system extension launches, run the ps command-line tool and note your extension’s process ID. This is the current output for my dext status % systemextensionsctl list 1 extension(s) --- com.apple.system_extension.driver_extension enabled active teamID bundleID (version) name [state] * * K3TDMD9Y6B com.accusys.scsidriver (1.0/1) com.accusys.scsidriver [activated enabled] and I used the ps command but nothing happen, I can not get my extension’s process ID. ps aux | grep com.accusys.scsidriver or ps -ef | grep com.accusys.scsidriver How to do that? Any suggestion is appreciated.

I have a driver project where I'm opening and closing a connection to a custom driver. If I do what I think I need to be doing to unmap the memory, when I try to open the service again, it fails. If I skip the step where I do that unmapping, the service opens successfully. If I call unmap() before trying to call openConnection() again, it will fail with a -308 error return code. If I skip that call to unmap(), it works and I'm able to communicate with my device. Here's the code where I open the service: public func openConnection() throws { guard !isOpen else { return } // Open device var connection: io_connect_t = IO_OBJECT_NULL var result = IOServiceOpen(device, mach_task_self_, 0, &connection) if result != kIOReturnSuccess { NSLog("Failed opening device with error: 0x%08x.\n", result); throw NSError.cdc_kernelReturnErrorWithError(result) } defer { IOConnectRelease(connection) } if device == IO_OBJECT_NULL || connection == IO_OBJECT_NULL { throw NSError.cdc_kernelReturnErrorWithError(result) } let receiveDataMappedMemory = ClientDriverMappedMemory(connection: connection, memoryType: MappedMemoryType_ReceiveDataBuffer) try receiveDataMappedMemory.map() let transmitDataMappedMemory = ClientDriverMappedMemory(connection: connection, memoryType: MappedMemoryType_TransmitDataBuffer) try transmitDataMappedMemory.map() // Setup async notification IONotificationPortSetDispatchQueue(dataReceivedPort, dataReceivedQueue) let callbackPort = IONotificationPortGetMachPort(dataReceivedPort) let input = DataStruct(foo: 0, bar: 0) var output = DataStruct(foo: 0, bar: 0) var outputSize = MemoryLayout<DataStruct>.size // Trampoline to C function because I don't quite know how to make this work in Swift result = setupCallback(self, connection, callbackPort, input, &output, &outputSize) if result != kIOReturnSuccess { NSLog("Error registering async callback with driver: \(result)"); throw NSError.cdc_kernelReturnErrorWithError(result) } self.connection = connection self.receivedDataMappedMemory = receiveDataMappedMemory self.transmitDataMappedMemory = transmitDataMappedMemory } map() and unmap() functions: - (BOOL)mapWithError:(NSError **)error { error = error ?: &(NSError * __autoreleasing){ nil }; kern_return_t result = IOConnectMapMemory64(self.connection, self.memoryType, mach_task_self(), &_address, &_size, kIOMapAnywhere); if (result != kIOReturnSuccess) { *error = [NSError cdc_kernelReturnErrorWithError:result]; return NO; } self.mapped = YES; return YES; } - (BOOL)unmapWithError:(NSError **)error { error = error ?: &(NSError * __autoreleasing){ nil }; kern_return_t result = IOConnectUnmapMemory64(self.connection, self.memoryType, mach_task_self(), _address); if (result != kIOReturnSuccess) { *error = [NSError cdc_kernelReturnErrorWithError:result]; return NO; } self.mapped = NO; return YES; } Any insights? What all should I be doing to close the service? Why would the unmapping create this issue or what else could the -308 error be indicated has gone wrong?

PLATFORM AND VERSION iOS Development environment: Xcode 15.4, macOS Sonoma 14.5 Run-time configuration: macOS Sonoma 14.5 DESCRIPTION OF PROBLEM Hi, I'm on DriverKit 21.0. I'm looking for a system call (that isn't deprecated) in my driver to set the Ethernet link speed manually. Normally a user would set it by System Settings... -> Network -> -> Details -> Hardware -> Configure (Manually), and then Speed (choose the link speed). With my driver, when I configure for manual, no link speeds show up. I want to know how to populate the speeds (1000BaseT, etc.) so a user can select one. What system APIs are used for this? I can't find much detail in the documentation. I do see Instance Methods for some related things like getSupportedMediaArray, but most of these newer methods don't have details in the documentation to guide me on what they actually do. Thanks in advance...

I am attempting to build a package for distribution. It is not clear how to fix the profile. Can someone point me some documentation that may help me resolve this? Xcode 14 and later requires a DriverKit development profile enabled for iOS and macOS. Visit the developer website to create or download a DriverKit profile.

Are Administrators able to request a system extension via https://developer.apple.com/contact/request/system-extension/ or are Account Holders the only ones who can?

I have been working on a multi-platform multi-touch HID-standard digitizer clickpad device. The device uses Bluetooth Low Energy (BLE) as its connectivity transport and advertises HID over GATT. To date, I have the device working successfully on Windows 11 as a multi-touch, gesture-capable click pad with no custom driver or app on Windows. However, I have been having difficulty getting macOS to recognize and react to it as a HID-standard multi-touch click pad digitizer with either the standard Apple HID driver (AppleUserHIDEventDriver) or with a custom-coded driver extension (DEXT) modeled, based on the DTS stylus example and looking at the IOHIDFamily open source driver(s). The trackpad works with full-gesture support on Windows 11 and the descriptors seem to be compliant with the R23 Accessory Guidelines document, §15. With the standard, matching Apple AppleUserHIDEventDriver HID driver, when enumerating using stock-standard HID mouse descriptors, the device works fine on macOS 14.7 "Sonoma" as a relative pointer device with scroll wheel capability (two finger swipe generates a HID scroll report) and a single button. With the standard, matching Apple AppleUserHIDEventDriver HID driver, when enumerating using stock-standard HID digitizer click/touch pad descriptors (those same descriptors used successfully on Windows 11), the device does nothing. No button, no cursor, no gestures, nothing. Looking at ioreg -filtb, all of the key/value pairs for the driver match look correct. Because, even with the Apple open source IOHIDFamily drivers noted above, we could get little visibility into what might be going wrong, I wrote a custom DriverKit/HIDDriverKit driver extension (DEXT) (as noted above, based on the DTS HID stylus example and the open source IOHIDEventDriver. With that custom driver, I can get a single button click from the click pad to work by dispatching button events to dispatchRelativePointerEvent; however, when parsing, processing, and dispatching HID digitizer touch finger (that is, transducer) events via IOUserHIDEventService::dispatchDigitizerTouchEvent, nothing happens. If I log with: % sudo log stream --info --debug --predicate '(subsystem == "com.apple.iohid")' either using the standard AppleUserHIDEventDriver driver or our custom driver, we can see that our input events are tickling the IOHIDNXEventTranslatorSessionFilter HID event filter, so we know HID events are getting from the device into the macOS HID stack. This was further confirmed with the DTS Bluetooth PacketLogger app. Based on these events flowing in and hitting IOHIDNXEventTranslatorSessionFilter, using the standard AppleUserHIDEventDriver driver or our custom driver, clicks or click pad activity will either wake the display or system from sleep and activity will keep the display or system from going to sleep. In short, whether with the stock driver or our custom driver, HID input reports come in over Bluetooth and get processed successfully; however, nothing happens—no pointer movement or gesture recognition. STEPS TO REPRODUCE For the standard AppleUserHIDEventDriver: Pair the device with macOS 14.7 "Sonoma" using the Bluetooth menu. Confirm that it is paired / bonded / connected in the Bluetooth menu. Attempt to click or move one or more fingers on the touchpad surface. Nothing happens. For the our custom driver: Pair the device with macOS 14.7 "Sonoma" using the Bluetooth menu. Confirm that it is paired / bonded / connected in the Bluetooth menu. Attempt to click or move one or more fingers on the touchpad surface. Clicks are correctly registered. With transducer movement, regardless of the number of fingers, nothing happens.

I am trying to add a few properties to an IOUSBHostDevice but the SetProperties is returning kIOReturnUnsupported. The reason I am trying to modify the IOUSBHostDevice's properties is so we can support a MacBook Air SuperDrive when it is attached to our docking station devices. The MacBook Air SuperDrive needs a high powered port to run and this driver will help the OS realize that our dock can support it. I see that the documentation for SetProperties says: The default implementation of this method returns kIOReturnUnsupported. You can override this method and use it to modify the set of properties and values as needed. The changes you make apply only to the current service. Do I need to override IOUSBHostDevice? This is my current Start implementation (you can also see if in the Xcode project): kern_return_t IMPL(MyUserUSBHostDriver, Start) { kern_return_t ret = kIOReturnSuccess; OSDictionary * prop = NULL; OSDictionary * mergeProperties = NULL; bool success = true; os_log(OS_LOG_DEFAULT, "&gt; %s", __FUNCTION__); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = Start(provider, SUPERDISPATCH); __Require(kIOReturnSuccess == ret, Exit); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ivars-&gt;host = OSDynamicCast(IOUSBHostDevice, provider); __Require_Action(NULL != ivars-&gt;host, Exit, ret = kIOReturnNoDevice); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = ivars-&gt;host-&gt;Open(this, 0, 0); __Require(kIOReturnSuccess == ret, Exit); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = CopyProperties(&amp;prop); __Require(kIOReturnSuccess == ret, Exit); __Require_Action(NULL != prop, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); mergeProperties = OSDynamicCast(OSDictionary, prop-&gt;getObject("IOProviderMergeProperties")); mergeProperties-&gt;retain(); __Require_Action(NULL != mergeProperties, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); OSSafeReleaseNULL(prop); ret = ivars-&gt;host-&gt;CopyProperties(&amp;prop); __Require(kIOReturnSuccess == ret, Exit); __Require_Action(NULL != prop, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); os_log(OS_LOG_DEFAULT, "%s : %s", "USB Product Name", ((OSString *) prop-&gt;getObject("USB Product Name"))-&gt;getCStringNoCopy()); os_log(OS_LOG_DEFAULT, "%s : %s", "USB Vendor Name", ((OSString *) prop-&gt;getObject("USB Vendor Name"))-&gt;getCStringNoCopy()); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); success = prop-&gt;merge(mergeProperties); __Require_Action(success, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = ivars-&gt;host-&gt;SetProperties(prop); // this is no working __Require(kIOReturnSuccess == ret, Exit); Exit: OSSafeReleaseNULL(mergeProperties); OSSafeReleaseNULL(prop); os_log(OS_LOG_DEFAULT, "err ref %d", kIOReturnUnsupported); os_log(OS_LOG_DEFAULT, "&lt; %s %d", __FUNCTION__, ret); return ret; }

I would like to write a driver that supports our custom USB-C connected device, which provides a serial port interface. USBSerialDriverKit looks like the solution I need. Unfortunately, without a decent sample, I'm not sure how to accomplish this. The DriverKit documentation does a good job of telling me what APIs exist but it is very light on semantic information and details about how to use all of these API elements. A function call with five unexplained parameters just is that useful to me. Does anyone have or know of a resource that can help me figure out how to get started?

I have a DriverKit system extension (dext) that uses PCIDriverKit. I would like to get the build environment straightened out to successfully distribute the dext and associated software to end users. There are three types of software involved: The Dext-hosting application - this is the application that must be installed to /Applications/, and will perform the registration of the dext. The dext is deployed "within" this application, and can be found in the /Contents/Library/SystemExtensions folder of the app bundle. The dext itself - this is the actual binary system extension, which will be registered by its owning application, and will operate in its own application space independent of the hosting application. Additional applications that communicate with the dext - these are applications which will connect to the dext through user clients, but these applications do not contain the dext themselves. There are multiple locations where settings need to be exactly correct for each type of software to be signed, provisioned, and notarized properly in order to be distributed to users: developer.apple.com - where "identifiers" and "provisioning profiles" are managed. Note that there are differences in access between "Team Agent", "Admin", and "Developer" at this site. Xcode project's Target "Signing & Capabilities" tab - this is where "automatically manage signing" can be selected, as well as team selection, provisioning profile selection, and capabilities can be modified. Xcode project's Target "Build Settings" tab - this is where code signing identity, code signing development team, code signing entitlements file selection, Info.plist options and file selection, and provisioning profile selection. Xcode's Organizer window, which is where you manage archives and select for distribution. In this case, I am interested in "Developer ID" Direct Distribution - I want the software signed with our company's credentials (Team Developer ID) so that users know they can trust the software. Choosing "automatically manage signing" does not work for deployment. The debug versions of software include DriverKit (development) capability (under App ID configuration at developer.apple.com), and this apparently must not be present in distributable provisioning. I believe this means that different provisioning needs to occur between debug and release builds? I have tried many iterations of selections at all the locations, for all three types of binaries, and rather than post everything that does not work, I am asking, "what is supposed to work?"

I have two different USB devices with different vendor IDs I would like to connect to. I submitted two separate requests for the com.apple.developer.driverkit.transport.usb entitlement for each vendor ID. However I am noticing the provisioning profile only has one of the vendor IDs. How do I submit a request for the USB Transport entitlement to support more than one vendor ID? I'm new to writing a DriverKit driver, so is this even possible?

I want to install a driver package without internet access and the installation fail. This I think it is due to it need internet to check for signature with Apple Server. The workaround is to disable System Integrity Protection, but I do not have the administrator password to disable it. How to install a driver and allow a driver to run without internet access and administrator account? This driver is develop by ourself but how to by pass the code signing and security check for others to use this driver on their Mac PC? Currently I am following https://developer.apple.com/documentation/systemextensions/ossystemextensionrequest/activationrequest(forextensionwithidentifier:queue:) to activate the system extension If the extension is inactive, the system may need to prompt the user for approval. Which others API can I use which do not need prompt user for approval? Beside in order to validate the code signing, it need to communicate with Apple server which required internet access. Any method to by pass this validation?

Hello, I'm developing a custom AU plugin that needs to connect to a DriverKit driver. Using the DriverKit sample (https://github.com/DanBurkhardt/DriverKitUserClientSample.git), I was able to get a standalone app to connect to the driver successfully. However, the AU plugin, running in a sandboxed host, isn't establishing the connection. I’ve already added the app sandbox entitlement, but it hasn’t helped. Any advice on what might be missing? TIA!

I have an app that includes a DriverKit extension that up until now I've been building without issue using Xcode 13. It was time to regenerate my Developer ID Application certificate so I needed to rebuild the app. However, I'm now running macOS Ventura and Xcode 14.3.1, and cannot get it to build in this later version of Xcode for reasons that are totally inscrutable to me. I've tried using both the newly generated provisioning profiles I've manually created in the "Certificates, Identifiers & Profiles" developer page, and the (still valid) provisioning profiles I already had installed. The trouble is that, when I select a provisioning profile I made for the DriverKit extension, Xcode won't accept it for the following reason: Platform: macOS Doesn't match platform DriverKit This makes no sense to me! There is no way to create a distribution provisioning profile for the "DriverKit" platform. All I can select is either "Mac" or "Mac Catalyst". So there's seemingly no way out of this. What am I missing?

In iPadOS 17.7 my driver shows up in settings just fine. After recompiling with Xcode 16 and installing my app (containing my driver) on iPadOS 18, the app shows up in settings but the driver-enable button is missing from Settings. When I plug-in my custom USB device, the app cannot detect it and I am left with no way to manually enable the driver, as I did in the previous version of iPadOS.

I am porting a working kernel extension IOKit driver to a DriverKit system extension. Our device is a PCI device accessed through Thunderbolt. The change from IOPCIFamily to PCIDriverKit has some differences in approach, though. Namely, in IOKit / IOPCIFamily, this was the correct way to become Bus Leader: mPCIDevice->setBusLeadEnable(true); // setBusMasterEnable(..) deprecated in OS 12.4 but now, PCIDriverKit's IOPCIDevice does not have that function. Instead I am doing the following: // Set Bus Leader and Memory Space enable uint16_t commandRegister = 0; ivars->mPCIDevice->ConfigurationRead16(kIOPCIConfigurationOffsetCommand, &commandRegister); commandRegister |= (kIOPCICommandBusLead | kIOPCICommandMemorySpace); ivars->mPCIDevice->ConfigurationWrite16(kIOPCIConfigurationOffsetCommand, commandRegister); But I am not convinced this is working (I am still experiencing unexpected errors when attempting to DMA from our device, using the same steps that work for the kernel extension). The only hint I can find in the online documentation is here, which reads: Note The endpoint driver is responsible for enabling the Memory Space Enable and Bus Master Enable settings each time it configures the PCI device. When a crash occurs, or when the system unloads your driver, the system disables these features. ...but that does not state directly how to enable bus leader status. What is the "PCIDriverKit approved" way to become bus leader? Is there a way to verify/confirm that a device is bus leader? (This would be helpful to prove that bus leadership is not the issue for DMA errors, as well as to confirm that bus leadership was granted). Thanks in advance!

I'm working on an app that contains a USB Driver Kit extension for iPad (NOT MAC). The app contains two targets, the core app and the DriverKit extension target. I can run the app just fine using a dev cert and provisioning profile. ** What is the step-by-step process for signing the release build?** There seems to be no way to create a release profile for the Driver Kit target. I've tried multiple avenues, but come to a dead end on each. I have requested and received the correct entitlements. Also, on a separate note, has anyone achieved this process using Fastlane? It seems particularly resistant to building the app with the driverkit extension, even for dev builds. It complains about the driverkit dev profile not being an iOS profile. Thanks!

Hello team, I am using USBDriverKit and Driverkit framework in my application for communication of USB device. After updating my iPad OS to 18 public beta, I am unable to get option to enable drivers in my setting page of my application. However, I am able to see that options in developer beta version of iPad OS 18. Can anyone guide me, how should I proceed further as I am unable to use my USB devices.

I have an Xcode project with a main app target, and a dext target which builds a DriverKit driver which is embedded in the main app. That all works, if I build the DriverKit target first, then switch to the app target and build that. The app and the driver work. If I make the Driver target a dependency of the App target, building the Driver fails because a header is not found, thus building the app fails. This doesn't make much sense - why does building a target as a consequence of dependence on another target produce a different result from building the same target manually? Has anyone else seen behavior like this? Have any hints on how to fix it? I've tried comparing the detailed build logs, but they don't shed much light - the lines are very long and the build steps appear to be executed in a different order. One strange thing I notice is that although I am building on an M1 Mac, with "build active architectures only" set to YES for both targets, in the Driver-target-only case, Driver.cpp is compiled for arm64, while in the failure case, Driver.cpp is compiled for x86_64. That doesn't make any sense to me either.