I went to check for a Apple Watch OS and it says not connected to Internet. I am definetly connected via Internet on my iPhone 6 so I am lost at what to try. I have done the following1. Switched the iPhone and Watch into Airplane mode then back on2. Rebooted the watch and the iPhoneNot sure what to do next, any ideas would be welcome.

My Parent app IS signed correctly. I have verified in every screen. Has anyone seen this?Thanks!XCode 10.0 beta 6---------------error: Embedded binary is not signed with the same certificate as the parent app. Verify the embedded binary target's code sign settings match the parent app's. Embedded Binary Signing Certificate: Software Signing Parent App Signing Certificate: - (Ad Hoc Code Signed)

watchOS 6 beta update paused saying “you can resume the download when you are connected to a WiFi network”. I am connected to wifi. Anyone seen this?

I'm using Xcode 12 beta 3. When running my Apple Watch's target on WatchOS 7, I get this error: Warning: Error creating LLDB target at path '/Users/evan/Library/Developer/Xcode/DerivedData/audigo-cneguthkmmoulfgcprsazbryrlrl/Build/Products/Debug-watchsimulator/AudigoWatchApplication.app'- using an empty LLDB target which can cause slow memory reads from remote devices. I know this error use to be when running 32 bit frameworks on 64 bit devices, but I'm not doing that. Is this a bug? Or is there a setting I don't know of that needs to be updated?

In WatchOS 6 a presented .sheet could be dismissed by swiping down or tapping on the navigationBarTitle. In the WatchOS 7 beta, presented sheets are no longer dismissible by either method...forcing the addition of a button to dismiss. It appears as if .sheet is now acting as .fullScreenCover within WatchOS 7. Anyone else running into this? Wondering if this is now expected behavior on WatchOS or if it's a bug...

Hi. I am pairing my Apple Watch Series 5 to my iPhone running ios 14. The pairing is successful but unable to proceed with the set up because an update is needed to be downloaded first. I updated the os for watch but I keep on getting “Unable to Check for Update - Checking for a software update failed because you are not connected to the internet”. I am definitely connected to the internet. Watch was reset to factory defaults and I am now pairing it as a new device but it fails due to the issue mentioned above.

Dear Community / Apple, I would like to ask in the name of many Smart Home Community, There is any developing / There is any future plan about make Apple Watches able to read NFC Tags / Stickers? Many of us would like to use Apple Watch to use Home Automations with NFC Stickers, but we have to use our iPhone instead of the Watch, what would be the most logical way to use these things. We does not really understand why this was not added by default, and why we cannot find any official information about this? Please provide us some answer, at least we should know should we still wait for this feature or this is not gonna be enabled by Apple?! Thank you very much, Gery

I've been using CloudKit for my app recently and I'm trying to add support for a WatchOS app and I've enabled iCloud in capabilities and ticked the container I want to use but I get this error. CoreData: error: CoreData+CloudKit: -[NSCloudKitMirroringDelegate recoverFromPartialError:forStore:inMonitor:]block_invoke(1943): <NSCloudKitMirroringDelegate: 0x282430000>: Found unknown error as part of a partial failure: <CKError 0x28112d500: "Permission Failure" (10/2007); server message = "Invalid bundle ID for container"; uuid = ; container ID = "iCloud.Appname"> I tried creating a new container which worked for both the watch app and iOS app however I would like to use my original container since it has my old data

I was trying out SiriKit Media Intents and found that with iOS 14, Media Intents can be handled in-app instead of using an extension. Given my current project structure, in-app intent handling suits my purpose better than handling it in an extension. But my question is about how this intent will be handled in a watchOS app? Is in-app Intent Handling supported on watchOS as well (if yes, are there any examples that I can refer to)? If not, can I create an extension for Media Intents and trigger it for watchOS while triggering the in-app handling for iOS alone? Please share if I have missed to read through some documentation / reference that solves this problem.

If a "Minimum Deployment Target" is updated to WatchOS7 on a product(iOS app with a companion watch app) that is already available on the App Store, watches running WatchOS6 will obviously no longer get updates. However, what is the experience for a user who has a WatchOS6 (maybe they own a Series 2) connected to an iPhone with iOS14? Will both the iPhone app and the Watch app stop getting updates? Will the Watch app stop getting updates, but the iPhone app continue receiving them and we have to manage this? Something else? Thanks in advance!

When I run watch app I got crash because I am using CMFallDetectionManager but I have added key in .plist Fall Detection Usage Description , when I run the watch app I got this error Fall Detection entitlement is required for this API so I read the documentation it says To apply for the entitlement, see Fall Detection Entitlement Request but when I click on the clink Fall Detection Entitlement Request I got this message The Apple ID you signed in with does not have permission to view this page.

I've ran into an error with the insertRouteData function of the HKWorkoutRouteBuilder that I can't seem to find any information on. The error is "Unable to find location series 1A193D3B-AFF5-41D8-A967-B1BE08D9F543 during data insert.". It seems to only happen when trying to insert very long routes, in the most recent case it was a 5 hour bike ride with 5900 samples. I save all the route data in a sqlite table as backup and after checking out the data there isn't any red flags as to why it would not insert correctly. Has anyone seen this before and could offer some insight or point me in the right direction to find the source of the error?

I'm trying to build a WatchOS 9 corner complication with WidgetKit (using Xcode 14 beta 3). I'd like my complication to look like the battery one in the bottom right corner. Here's my view: struct HydrationProgressCorner: View {     var entry: Provider.Entry     var body: some View {         Text("\((100 * entry.progress / entry.target).rounded(.towardZero).formatted())%")             .widgetLabel {                 ProgressView(value: entry.progress, total: entry.target)                     .tint(.blue)                     .widgetAccentable()             }     } } How can I get my text to follow the curvature of the watch face?

Hey, so I am creating an app that will get the core motion data (accelerometer and gyroscope) from my apple watch and stream it onto a console. I am able to get accelerometer data but not a gyroscope from my apple watch. When I try it with my phone I get both. So is gyroscope data not available for the apple watch?

Right, this is getting on my nerves now. iOS app installed on iPhone via Xcode. Watch app installed on Watch via Xcode. Both apps are running and are in the foreground. iOS app launches on iPhone and reports: WCSession.isSupported = YES theDelegate.session.isPaired = YES theDelegate.session.watchAppInstalled = NO theDelegate.session.activationState = Activated I press a button in the Watch app. It reports: session == activated and reachable iOS app delegate receives a message from the Watch app: didReceiveMessage (from Watch): message = {     action = giveMeUpdatedItems; } The apps must be installed on the devices in order for the Watch app to have used sendMessage (which is only available if the session is reachable, which it is). iOS app delegate passes that through as a notification to another bit of code that collates the info and sends it back to the Watch app. watchNotificationUpdateData; userInfo = {     action = giveMeUpdatedItems; } That bit of code in the iOS app checks whether we can send data to the Watch app, and doesn't send the data because: WCSession.isSupported = YES theDelegate.session.isPaired = YES theDelegate.session.watchAppInstalled = NO theDelegate.session.activationState = Activated If I remove the check for watchAppInstalled, I get this: Error sending Watch application context: Watch app is not installed. {     NSLocalizedDescription = "Watch app is not installed.";     NSLocalizedRecoverySuggestion = "Install the Watch app."; } I've deleted and reinstalled the app on both devices countless times. I've rebooted the devices, plus the Mac. I've reinstalled Xcode. I've cleaned builds. I've deleted DerivedData. And still it says the companion app isn't installed.

I recently raised this post explaining how I couldn't seem to get watchOS 9 complications to work, and I've figured out a partial fix. The original post details the issues with complications - and some are still valid - but this fix applies to both my complications and Home Screen / Lock Screen widgets. I was following the various WWDC 2020/2022 videos and the Emoji Rangers sample code, adding bits here and there, and assuming they were completely valid. Sadly, this bit of code in the widget's dynamic intents IntentTimelineProvider getTimeline really just banjaxed everything: // Create entries for one day, 15 minutes apart let currentDate = Date() for minuteOffset in stride(from: 0, to: 60 * 60 * 24, by: 15) { let entryDate = Calendar.current.date(byAdding: .minute, value: minuteOffset, to: currentDate)! entries.append(EventEntry(date: entryDate, event: event)) } If I remove that, and generate a different timeline with specific dates and times (for example: now, in 10 mins, in 2 hours, in a day, etc.) the complications appear correctly, as do Home Screen and Lock Screen widgets. The outstanding issues with complications are: The previews all use the same data, but getSnapshot() is supposed to return the data specific to that event from the configuration, i.e. if let theId = configuration.event?.identifier. "Christmas" is correct, but "Gallery Opening" is using Christmas's data. Once I've selected the event I want to use in a complication the edit screen shows it as totally blank, not even a placeholder: I hope this little fix works for you guys. And, if you know how to fix the above issues, let me know. (iOS 16.1 beta 1, Xcode 14.1 beta 1)

HI, I have an issue displaying SwiftUI previews with Xcode 14. My project has iOS and an watchOS Target. It also includes a lot of SPM, most of them only used by the PhoneApp. The project build successfully for both iOS and watchOS. I can see that when building the watch target, only SPM that are included in this target are build for for watchOS The issue is when I try to build a swiftUI preview of the watch target. In this case I can see on the build for Preview log that Xcode try to build ALL spm defined in the Xcode project, including the one that are not used by the watch Target, As a lot if spm are for iOS only, and doesn't build for watchOS, the build for preview fails, and I'm unable to preview my swiftUI views on the AppeWatch. Note that my project is working fine on Xcode 13. This issue is easy to reproduce in any Xcode projects containing a iOS and watchOS target by adding a SPM that is only for iOS. Any workaround to fix this issue ?

I am running the watch on watchOS 9 and trying to enable "developer mode" (which requires a restart). However, upon restart, developer mode remains disabled. I tried several times, but developer mode just won't turn on. any thought how to solve?

I like to keep my apps watch face complication up to date when the user completes an activity but calling WidgetCenter.shared.reloadAllTimelines() is not working as well as the old complication update now I want to go back to complications. I used to call CLKComplicationServer.sharedInstance().reloadTimeline(for: <#T##CLKComplication#>) which would update my complication instantly. The simulator seams to up date widgets immediately but now my app has been released pn the App Store it is not updating. Any one else experiencing this.

Hi I just got my Apple Watch Ultra and I am trying to access depth and water temperature with the new CMWaterSubmersion api and I am getting CMErrorDomain 110 (which is CMErrorNotEntitled). Not sure exactly what this means, I am guessing I there is an entitlement missing? https://developer.apple.com/documentation/coremotion/cmwatersubmersionmeasurement