Overview

When call: [UITabBarController setViewControllers:animated:] It crashed and raise an Fatal Exception: Fatal Exception: NSInternalInconsistencyException Attempting to select a view controller that isn't a child! (null) the crash stack is: Fatal Exception: NSInternalInconsistencyException 0 CoreFoundation 0x8408c __exceptionPreprocess 1 libobjc.A.dylib 0x172e4 objc_exception_throw 2 Foundation 0x82215c _userInfoForFileAndLine 3 UIKitCore 0x38a468 -[UITabBarController transitionFromViewController:toViewController:transition:shouldSetSelected:] 4 UIKitCore 0x3fa8a4 -[UITabBarController _setSelectedViewController:performUpdates:] 5 UIKitCore 0x3fa710 -[UITabBarController setSelectedIndex:] 6 UIKitCore 0x8a5fc +[UIView(Animation) performWithoutAnimation:] 7 UIKitCore 0x3e54e0 -[UITabBarController _setViewControllers:animated:] 8 UIKitCore 0x45d7a0 -[UITabBarController setViewControllers:animated:] And it appear sometimes, what's the root cause?

Hi, It seems that on M4 devices any virtual machine with macOS version older than 13.4 fail to boot, they stuck with a black screen. This is regardless of the virtualization software used (UTM, VirtualBuddy, Viable, etc...). After talking to many people everyone experiences the same. At least for me, this is a massive limitation of the platform, I really hope this is a bug which can be fixed. Thanks, Csaba

Hi, I found when continuously predicting with the same Core ML model in 120 FPS will be faster than in 60 FPS. I use Macbook Pro M2 and turn on ProMotion to run Core ML model prediction with a 120 FPS video, the average prediction time is 7.46ms as below: But when I turn off ProMotion, set 60 Hz refresh rate, and run Core ML model prediction with a 60 FPS video, the average prediction time is 10.91ms as below: What could be the technical explanation for these results? Is there any documentation or technical literature that addresses this behavior?

Hello Apple Developer Team, I am facing an issue with remote notifications in my iOS app. When the app is in a terminated (kill) state, notifications are successfully received by the device, but none of the app's handlers (like _firebaseMessagingBackgroundHandler in Flutter) are invoked. This is impacting our ability to process silent notifications or perform background tasks reliably when the app is not running. Steps to reproduce: Send a remote notification with content-available: 1 in the payload. Confirm the notification is received by the device while the app is in kill mode. Observe that no background or foreground notification methods are triggered in the app. Expected Behavior: The app should invoke the background handler to process the notification payload, even in a terminated state. Observed Behavior: The notification is delivered to the device, but no app-level processing occurs because none of the methods are triggered. Can you please confirm if this is the intended behavior due to iOS limitations, or if there is a configuration or alternative solution to allow background handlers to execute in such scenarios? Any guidance or clarification would be highly appreciated. Thank you!

Iam trying to notarize with notarytool command with app-specific password. xcrun notarytool submit <Path> --apple-id <APPLE_ID> --password <APP_SPECIFIC_PASSWORD> --team-id <Team-ID> But it fails with error Error: HTTP status code: 401. Unable to authenticate. Invalid session. Ensure that all authentication arguments are correct. Tried generating new app-specific password, still failing. Tried storing password in keychain with store-credentials option, again failing. --verbose option with store-credentials showing below error This process stores your credentials securely in the Keychain. You reference these credentials later using a profile name. Validating your credentials... [06:05:28.854Z] Info [API] Initialized Notary API with base URL: https://appstoreconnect.apple.com/notary/v2/\ [06:05:28.854Z] Info [API] Preparing GET request to URL: https://appstoreconnect.apple.com/notary/v2/test?, Parameters: [:], Custom Headers: private<Dictionary<String, String>> [06:05:28.855Z] Debug [AUTHENTICATION] Delaying current request to refresh app-specific password token. [06:05:28.855Z] Info [API] Preparing GET request to URL: https://appstoreconnect.apple.com/notary/v2/asp?, Parameters: [:], Custom Headers: private<Dictionary<String, String>> [06:05:28.855Z] Debug [AUTHENTICATION] Authenticating request to '/notary/v2/asp' with Basic Auth. Username: , Password: private, Team ID: [06:05:28.856Z] Debug [TASKMANAGER] Starting Task Manager loop to wait for asynchronous HTTP calls. [06:05:30.194Z] Debug [API] Received response status code: 401, message: unauthorized, URL: https://appstoreconnect.apple.com/notary/v2/asp?, Correlation Key: [06:05:30.195Z] Error [TASKMANAGER] Completed Task with ID 2 has encountered an error. [06:05:30.195Z] Debug [TASKMANAGER]Ending Task Manager loop. Error: HTTP status code: 401. Unable to authenticate. Invalid session. Ensure that all authentication arguments are correct.

Info lebih lanjut dapat menghubungi tim support melalui layanan live chat di aplikasi Bibit atau via Whatsapp di nomor +62878-4457-9642 atau klik tombol di bawah untuk ditangani lebih lanjut.

Ini adalah nomor WhatsApp Indodak 087844579642

Kamu dapat menggunakan layanan Deposit USD Langsung tanpa kehilangan nilai uang karena selisih kurs valas minimum US$10.000 dengan menghubungi Priority Service Line di nomor (021) 8063 0065 atau 0878-4457-9642 (hanya untuk chat whatsapp)

Hi, How to customize tables in SwiftUI its color background for example, the background modifier doesn't work ? how to change separator lines ? rows background colors ? give header row different colors to its text and background color ? Kind Regards

I have followed https://apple.github.io/coremltools/docs-guides/source/installing-coremltools.html but failed. Looks like the doc is too outdated.

I have an app with the following model: @Model class TaskList { @Attribute(.unique) var name: String // Relationships var parentList: TaskList? @Relationship(deleteRule: .cascade, inverse: \TaskList.parentList) var taskLists: [TaskList]? init(name: String, parentTaskList: TaskList? = nil) { self.name = name self.parentList = parentTaskList self.taskLists = [] } } If I run the following test, I get the expected results - Parent has it's taskLists array updated to include the Child list created. I don't explicitly add the child to the parent array - the parentList relationship property on the child causes SwiftData to automatically perform the append into the parent array: @Test("TaskList with children with independent saves are in the database") func test_savingRootTaskIndependentOfChildren_SavesAllTaskLists() async throws { let modelContext = TestHelperUtility.createModelContext(useInMemory: false) let parentList = TaskList(name: "Parent") modelContext.insert(parentList) try modelContext.save() let childList = TaskList(name: "Child") childList.parentList = parentList modelContext.insert(childList) try modelContext.save() let fetchedResults = try modelContext.fetch(FetchDescriptor<TaskList>()) let fetchedParent = fetchedResults.first(where: { $0.name == "Parent"}) let fetchedChild = fetchedResults.first(where: { $0.name == "Child" }) #expect(fetchedResults.count == 2) #expect(fetchedParent?.taskLists.count == 1) #expect(fetchedChild?.parentList?.name == "Parent") #expect(fetchedChild?.parentList?.taskLists.count == 1) } I have a subsequent test that deletes the child and shows the parent array being updated accordingly. With this context in mind, I'm not seeing these relationship updates being observed within SwiftUI. This is an app that reproduces the issue. In this example, I am trying to move "Finance" from under the "Work" parent and into the "Home" list. I have a List that loops through a @Query var taskList: [TaskList] array. It creates a series of children views and passes the current TaskList element down into the view as a binding. When I perform the operation below the "Finance" element is removed from the "Work" item's taskLists array automatically and the view updates to show the removal within the List. In addition to that, the "Home" item also shows "Finance" within it's taskLists array - showing me that SwiftData is acting how it is supposed to - removed the record from one array and added it to the other. The View does not reflect this however. While the view does update and show "Finance" being removed from the "Work" list, it does not show the item being added to the "Home" list. If I kill the app and relaunch I can then see the "Finance" list within the "Home" list. From looking at the data in the debugger and in the database, I've confirmed that SwiftData is working as intended. SwiftUI however does not seem to observe the change. ToolbarItem { Button("Save") { list.name = viewModel.name list.parentList = viewModel.parentTaskList try! modelContext.save() dismiss() } } To troubleshoot this, I modified the above code so that I explicitly add the "Finance" list to the "Home" items taskLists array. ToolbarItem { Button("Save") { list.name = viewModel.name list.parentList = viewModel.parentTaskList if let newParent = viewModel.parentTaskList { // MARK: Bug - This resolves relationship not being reflected in the View newParent.taskLists?.append(list) } try! modelContext.save() dismiss() } } Why does my explicit append call solve for this? My original approach (not manually updating the arrays) works fine in every unit/integration test I run but I can't get SwiftUI to observe the array changes. Even more strange is that when I look at viewModel.parentTaskList.taskLists in this context, I can see that the list item already exists in it. So my code effectively tries to add it a second time, which SwiftData is smart enough to prevent from happening. When I do this though, SwiftUI observes a change in the array and the UI reflects the desired state. In addition to this, if I replace my custom list rows with an OutlineGroup this issue doesn't manifest itself. SwiftUI stays updated to match SwiftData when I remove my explicit array addition. I don't understand why my views, which is passing the TaskList all the way down the stack via Bindable is not updating while an OutlineGroup does. I have a complete reproducible ContentView file that demonstrates this as a Gist. I tried to provide the source here but it was to much for the post. One other anecdote. When I navigate to the TaskListEditorScreen and open the TaskListPickerScreen I get the following series of errors: error: the replacement path doesn't exist: "/var/folders/07/3px_03md30v9n105yh3rqzvw0000gn/T/swift-generated-sources/@_swiftmacro_09SwiftDataA22UIChangeDetectionIssue20TaskListPickerScreenV9taskLists33_A40669FFFCF66BB4EEA5302BB5ED59CELL5QueryfMa.swift" I saw another post regarding these and I'm wondering if my issue is related to this. So my question is, do I need to handle observation of SwiftData models containing arrays differently in my custom views? Why do bindings not observe changes made by SwiftData but they observe changes made explicitly by me?

I have a CALayer and I'd like to animate a property on it. But, the property that triggers the animation change is different to the one that is being changed. A basic example of what I'm trying to do is below. I'm trying to create an animation on count by changing triggerProperty. This example is simplified (in my project, the triggerProperty is not an Int, but a more complex non-animatable type. So, I'm trying to animate it by creating animations for some of it's properties that can be matched to CABasicAnimation - and rendering a version of that class based on the interpolated values). @objc class AnimatableLayer: CALayer { @NSManaged var triggerProperty: Int @NSManaged var count: Int override init() { super.init() triggerProperty = 1 setNeedsDisplay() } override init(layer: Any) { super.init(layer: layer) } required init?(coder: NSCoder) { fatalError("init(coder:) has not been implemented") } override class func needsDisplay(forKey key: String) -> Bool { return key == String(keypath: \AnimatableLayer.triggerProperty) || super.needsDisplay(forKey: key) } override func action(forKey event: String) -> (any CAAction)? { if event == String(keypath: \AnimatableLayer.triggerProperty) { if let presentation = self.presentation() { let keyPath = String(keypath: \AnimatableLayer.count) let animation = CABasicAnimation(keyPath: keyPath) animation.duration = 2.0 animation.timingFunction = CAMediaTimingFunction(name: CAMediaTimingFunctionName.linear) animation.fromValue = presentation.count animation.toValue = 10 return animation } } return super.action(forKey: event) } override func draw(in ctx: CGContext) { print("draw") NSGraphicsContext.saveGraphicsState() let nsctx = NSGraphicsContext(cgContext: ctx, flipped: true) // create NSGraphicsContext NSGraphicsContext.current = nsctx // set current context let renderText = NSAttributedString(string: "\(self.presentation()?.count ?? self.count)", attributes: [.font: NSFont.systemFont(ofSize: 30)]) renderText.draw(in: bounds) NSGraphicsContext.restoreGraphicsState() } func animate() { print("animate") self.triggerProperty = 10 } } With this code, the animation isn't triggered. It seems to get triggered only if the animation's keypath matches the one on the event (in the action func). Is it possible to do something like this?

Our app involves using the camera to scan barcodes or QR codes, with a working distance of about 5 cm. However, we’ve noticed variations in the focus distance of camera lenses across different iPhone models. Currently, we mainly use two types of lenses: wide-angle and ultra-wide-angle. • For iPhone 13 and earlier models, we use the wide-angle lens. • For iPhone 13 Pro and later models, we use the ultra-wide-angle lens. We are not certain if this setup is correct since we don’t have all iPhone models to test.
There is a users have reported focus issues on his iPhone 15. We would like to ask if there’s a resource where we can find the minimum focus distance of different cameras in each iPhone model. This is to verify whether our current configuration is accurate. Alternatively, if such data is not readily available, could apple tam advise which camera should be used on various iPhone models for scenarios with a working distance of approximately 5 cm? Thank you!

I'm trying to implement anti-spoofing in iOS app using iphone true depth front camera. I have checked the following questions still can't find a proper working solution. I trained a coreML model using 22000 depth human face images and 22000 non-human face(objects,food etc) images. The accuracy of the model is very less. When testing out with flat 2d images shown on a smartphone screen I found that I get depth map even for flat 2D images like this. Even though the image is flat how does it give the depth map for the person shown in the flat 2D picture so the model thinks that it is a real face instead of a spoofed one. I implemented depth capture by following this documentation and I made sure that I get depth map instead of disparity map https://developer.apple.com/documentation/avfoundation/additional_data_capture/capturing_photos_with_depth My next approach was to use NCNN framework to implement anti-spoofing by using the model used in the Mini-vision android anti-spoofing sample. I rewrote their library in iOS by using the objective C++ wrapper for C++ as the sample was only available for android app. And I tested by feeding 80x80 UI-Image in a open cv matrix format it's accurracy is less than the android one. How can I solve this problem.

I work on an SDK, and one of the ways we distribute it is as a pre-compiled static XCFramework. As far as I know, it’s the nature of a static framework to not contain symbols since the framework will be embedded in the final app binary, and the symbols should then be generated. However, when testing the "Validate" function of the Xcode 16 deployment process, our users are receiving a warning that says the framework does not contain symbols. Is my assumption about static frameworks and symbols incorrect? Could this be a bug in Xcode 16? Should we modify something in our framework to inform Xcode that symbols are not needed?

Why did I receive a CONSUMPTION_REQUEST for the same transaction_id the day after I already received a REFUND for it? I received a CONSUMPTION_REQUEST, but due to a program error, I failed to submit the customer information. Later, I was notified with a REFUND, indicating that the transaction had been refunded. However, the next day, I received another CONSUMPTION_REQUEST notification for the same transaction_id.

Hi! I'm creating an app like this: Using Image Tracking to set world anchor in real world first. The timeline in Reality Composer Pro scene needs to be played in same time(for the people in same place using the app). People using the app will see the same contents in same position in same time in same place. I already made Image Tracking feature worked. But the big problem is "Synchronization". I found Group Activities and TabletopKit to solve the problem. But I don't know if this are the right modules for this project. How do I solve this problem technically? If you have ideas, please let me know. I really need help for this.

I'm confused by documentation and information I found regarding compatibility between versions of Xcode and macOS. The site https://developer.apple.com/support/xcode/ is listing "Minimum OS required". To my understanding it means "this particular version of macOS and all later/newer versions". Also release notes for Xcode are consistently stating "Xcode xx.x. requires a Mac running macOS yy.yy.y or later." But I also found statements like " In general, new versions of macOS will not run old versions of Xcode." in this forum, see https://forums.developer.apple.com/forums/thread/760737, which is the opposite to "requires macOS version X or later". I'm also experiencing issues when trying to run Xcode 12.4 on macOS 14.5 (Sonoma), means XCode is not running. It would be great if some of Apple Engineers here would shed some light on it :-) Many thanks in advance! Cheers, Elena

I have a SwiftUI based program that has compiled and run consistently on previous macos versions. After upgrading to 15.2 beta 4 to address a known issue with TabView in 15.1.1, my app is now entering a severe hang and crashing with: "The window has been marked as needing another Update Contraints in Window pass, but it has already had more Update Constraints in Window passes than there are views in the window. .<SwiftUI.AppKitWindow: 0x11d82a800> 0x87 (2071) {{44,0},{1468,883}} en" Is there a known bug that could be causing this crash or known change in the underlying layout model?

Can someone give me an easy way to fix this code?