PLATFORM AND VERSION iOS Development environment: Xcode 15.0, macOS 14.4.1, Objective-C Run-time configuration: iOS 17.2.1, DESCRIPTION OF PROBLEM I am developing an application that uses NetworkExtension (VoIP local push function). But iOS sometimes doesn't call didActivateAudioSession after following sequence. Would you tell me why iOS doesn't call didActivateAudioSession ? (I said "sometimes", but once it occurs, it will occur repeatedly) myApp --- CXStartCallAction --->iOS myApp <-- performStartCallAction callback --- iOS myApp --- AVAudioSession setCategory: AVAudioSessionCategoryPlayAndRecord --->iOS myApp --- AVAudioSession setMode: AVAudioSessionModeVoiceChat --->iOS myApp <-- didActivateAudioSession callback ----iOS I suspect that myApp cannot acquire an AVAudioSession if another app is already using AVAudioSession. [QUESTION1] Is my guess correct? Should I consider another cause? [QUESTION2] If my guess is correct, how can I prove if another app is already using an AVAudioSession? This issue is based on a customer complaint, but the customer said they don't use any other apps. Best Regards,

PLATFORM AND VERSION iOS Development environment: Xcode 15.0, macOS 14.4.1, Objective-C Run-time configuration: iOS 17.2.1, DESCRIPTION OF PROBLEM What is the general approach to analyzing cpu_resource_fatal.ips? Is there a standard way to analyze it? (Instruments are not available in this analysis, because this is only occurs on the customer's iPhone.) Also, can this file be symbolicate? Attachment file is a sample ips file. FjSoftPhone.cpu_resource_fatal-2024-06-21-150321.ips

Users of my app have reported that they are sometimes unable to receive Voice-over-IP (VoIP) push notifications when using a SIM. (There is no problem when using WiFi) VoIP push notifications were not received during the following period. Could you confirm diagnostic logs and could you please tell me why my app can't receive VoIP push? [diagnostic logs] https://drive.google.com/drive/folders/1gSAbr1Fy1SrjlmRXuAzoXqiaxnNbFhj8?usp=sharing [Problem period] 2024/06/17 05:34:59 - 2024/06/17 09:04:42 Number of times that the push server pushed and it received a normal APNs response: 31 Number of times that iPhone received pushes: 0 2024/06/17 23:05:03 - 2024/06/18 09:02:16 Number of times that the push server pushed and it received a normal APNs response: 192 Number of times that iPhone received pushes: 0 2024/06/15 00:35:56 - 2024/06/15 09:55:57 Number of times that the push server pushed and it received a normal APNs response: 138 Number of times that iPhone received pushes: 0

Why does E210002 error occur only when launched svnserve via launchctl? When I start svnserve with $ sudo /usr/local/bin/svnserve -d -r /Volumes/RAID1disk/svn and run $ svn commit -m "test1", svn commit succeeds, but when I start svnserve with $ sudo launchctl load -w /Library/LaunchDaemons/com.toshiyuki.svnserve.plist and run $ svn commit -m "test2", svn commit fails and displays the following error: Committing transaction... svn: E210002: Commit failed (details follow): svn: E210002: Network connection closed unexpectedly After the E210002 error, I ran $ ps aux | grep svnserve and got the following result. toshiyuki 67686 0.0 0.0 34252296 700 s000 S+ 10:13AM 0:00.00 grep svnserve root 35267 0.0 0.0 34302936 592 ?? Ss 10:01AM 0:00.00 /usr/local/bin/svnserve -d -r /Volumes/RAID1disk/svn From this, I believe that svnserve is launched as the root user from launchctl. Also, when I ran $ls -l /volumes/raid1disk/svn the following result was obtained. -rw-rw-r-- 1 root wheel 246 7 23 22:31 README.txt drwxrwxr-x 6 root wheel 192 7 24 06:31 conf drwxrwxr-x 17 root wheel 544 7 24 10:01 db -r--rw-r-- 1 root wheel 2 7 23 22:31 format drwxrwxr-x 11 root wheel 352 7 23 22:31 hooks drwxrwxr-x 4 root wheel 128 7 23 22:31 locks so, svnserve has write access to the repository. If I start svnserve with $ sudo /usr/local/bin/svnserve -d -r /Volumes/RAID1disk/svn instead of $ sudo launchctl load -w /Library/LaunchDaemons/com.toshiyuki.svnserve.plist both svn commit and svn chekout always succeed, so I think there is no problem with the svnserve configuration file (/etc/svnserve.conf or the file in /etc/svnserve.conf.d). I think the plist of launchctl is also correct. because If I start svnserve with $ sudo launchctl load -w /Library/LaunchDaemons/com.toshiyuki.svnserve.plist only svn chekout always succeeds (commit fails, though). The contents of the plist of launchctl file are as follows: &lt;?xml version="1.0" encoding="UTF-8"?&gt; &lt;!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"&gt; &lt;plist version="1.0"&gt; &lt;dict&gt; &lt;key&gt;Label&lt;/key&gt; &lt;string&gt;com.toshiyuki.svnserve&lt;/string&gt; &lt;key&gt;ProgramArguments&lt;/key&gt; &lt;array&gt; &lt;string&gt;/usr/local/bin/svnserve&lt;/string&gt; &lt;string&gt;-d&lt;/string&gt; &lt;string&gt;-r&lt;/string&gt; &lt;string&gt;/Volumes/RAID1disk/svn&lt;/string&gt; &lt;/array&gt; &lt;key&gt;RunAtLoad&lt;/key&gt; &lt;true/&gt; &lt;key&gt;KeepAlive&lt;/key&gt; &lt;true/&gt; &lt;key&gt;StandardErrorPath&lt;/key&gt; &lt;string&gt;/var/log/svnserve.log&lt;/string&gt; &lt;key&gt;StandardOutPath&lt;/key&gt; &lt;string&gt;/var/log/svnserve.log&lt;/string&gt; 　　&lt;key&gt;UserName&lt;/key&gt; &lt;string&gt;root&lt;/string&gt; &lt;key&gt;EnvironmentVariables&lt;/key&gt; &lt;dict&gt; &lt;key&gt;PATH&lt;/key&gt; &lt;string&gt;/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin&lt;/string&gt; &lt;/dict&gt; &lt;/dict&gt; &lt;/plist&gt; Also, the execution result of $ls -l /library/LaunchDaemons/com.toshiyuki.svnserve.plist is as follows. -rw-r--r--@ 1 root wheel 929 7 24 10:29 /library/LaunchDaemons/com.toshiyuki.svnserve.plist But when I start svnserve with $ sudo launchctl load -w /Library/LaunchDaemons/com.toshiyuki.svnserve.plist "svn commit" always fails. Why is this? When I check the /var/log/svn/svnserve.log file, svnserve: E000048:Address already in use errors occured periodically.

I am creating a VoIP application. The VoIP application needs to send and receive RTP packets at 20 ms intervals. The application calls sendto() of the Socket API at 20 ms intervals, but the iPhone buffers the send data inside iOS and then sends RTP packets in batches at 1 second intervals. (I captured the sned packets of iPhone with rvctl and confirmed this. please reffer "Sending at 1 second intervals.png" for detail) Similarly, other devices send RTP packets to the iPhone at 20 millisecond intervals, but the iPhone only receives them at 1 second intervals. (please reffer "Receiving at 1 second intervals.png" for detail) Why is this? If the cause of the delay is in the Wi-Fi protocol and the cause can be found from sysdiagnose, please tell me the search key for sysdiagnose that shows the cause of the delay and the meaning of the corresponding log. I uploaded sysdiagnose and result of lan capture to below. [sysdiagnose and lan capture] https://drive.google.com/file/d/149OPmePAF4hnZj6NeSnKc5NizfitPQDS/view?usp=sharing And, the start and end times, packet number in the lan capture of the call shown in the png example are below Start time; 13:57:22.349608/packet number; 948 End time; 13:57:37.482874/packet number; 2583

Currently, our provider server uses token-based authentication with APNs. In addition, to establish a connection with APNs, we have installed the "AAACertificateServices 5/12/2020" certificate from the "Sectigo KnowledgeBase website" on the provider server. Question 1 Do I need to update the server certificate of the Apple Push Notification Service at the following URL for the above provider server? URL https://developer.apple.com/jp/news/?id=09za8wzy Question 2 If registration is required, how long will it be valid for? Root certificate https://developer.apple.com/documentation/usernotifications/setting-up-a-remote-notification-server Token-based authentication https://developer.apple.com/documentation/usernotifications/establishing-a-token-based-connection-to-apns