watch os 6 not pairing with IOS 13 beta

Same issue. iPhone XS Max & series 4 watch. I watch on os 6, device updated to 13.6 and same exact issue yore having, I am having. Spent the better part of the day on the phone with Apple support. Well apparently there is a bug in the Beta, but they also gave me some explanation about attempting to pair and failing too many times causes a hardware issue. So they set up a mail exchange for me at no charge. Overnight both ways. New (refurb) watch in 3 days. Either that or wait till beta 7 and hope they fix it. Good luck.

Repost: GM64 Jul 9, 2019 1:10 AM (in response to peterinaustralia) I had the same issue. Please follow exactly the next steps: (a) Set the language and region to both iphone and watch to US (to change it in the watch press the "i" and follow the instructions) (b) Try to pair and wait to finish, but on the message to press the "Corone" DO NOT PRESS IT! It is very important! (c) At that moment install the watch beta profile from developers site and let the watch to complete the update, without using your phone in the mean time (d) Normally after that will be OK

Repost: GM64 Jul 9, 2019 1:10 AM (in response to peterinaustralia) I had the same issue. Please follow exactly the next steps: (a) Set the language and region to both iphone and watch to US (to change it in the watch press the "i" and follow the instructions) (b) Try to pair and wait to finish, but on the message to press the "Corone" DO NOT PRESS IT! It is very important! (c) At that moment install the watch beta profile from developers site and let the watch to complete the update, without using your phone in the mean time (d) Normally after that will be OK

Talked with Apple Support just now. Only thing they could offer me is to send me a box to send my S4 Apple Watch in so they can remove the beta and return it to me. Can’t even perform this task at an Apple Store.

I go through pairing process till "Connecting to your Apple Watch..." message when iPhone gets stuck with this screen while Apple Watch switches to it's into animation showing to get Watch closer to iPhone.
Was trying to install WatchOS 6 certificate while pairing but failed.
Any ideas? Have no easy way to send my Watch to Genius guys.

I called Apple Support 2 days ago and after an hour of discussions, they are sending me the box as well to send the watch in have the beta wiped out. I should have never done the beta on my watch....lesson learnt! 😎

I actually did what you suggested and the "pairing" would commence however, after a few seconds, it would say "unpairing watch" and get stuck. Did not work for me hence, my call to Apple support.

same problem... =(

None of this worked for me. I would get to the pairing screen and it would just bounce my watch back to the setup screen and my phone would say "Unpairing apple watch"

I did the same, and they sent me a box, I sent the watch in yesterday, they recieved it today, then like three hours later I get a message that the watch is being sent back to me because they "couldn't duplicate the issue"... which is insane because the issue is it having the beta software, and the person who set up the repair understood that and said it wasn't an issue. What a waste of time!

As I am responsible for all mobile devices in our company, I got an iPhone 6S here with Beta 5.

Actually its pairing again. Maybe I can do a watchos update then and will be able to pair with my XS on beta 7.

I will tell you things soon.

me too

Ok, my watch is working again. :-)

I installed iOS13 Beta 5 on an other iPhone and paired my Watch.

Installed watchos beta profile and updated to the latest watchos6 beta.

Then I unpaired from my 6S and paired successfully on my XS with beta 7.

If you dont have a 2nd iPhone you can restore yours with beta 5. Install watch beta profile and updarte your watch. Then update your iPhone to beta 7 and everything is working. As Apple is still signing all iOS 13 beta versions there should not be a problem to downgrade first.

Regards

Where did you find a download for the older beta? Thanks!!

I have the same problem, as I can get from Beta 7 to Beta 5. Help me please I have the Apple Watch as a brick for a week.

I got it, check out the thread i started

where is the thread?

🏻♂ I could not find it

Here's what I wrote. As a side note, this will take a while. At least it is for me right now. "Hi everyone, I fixed the issue. I found a download of the beta 5 ipsw on a website called ipod hacks 142. Make sure you BACKUP your phone first, you may have to reset to get the watch app working smoothly as I had to. Then everything should be fine. Let me know if you have questions!"

No pude hacerlo, intente hacerlo en Windows ya que estoy en el trabajo y no ando con el Mac. Tendre que intentar mas tarde, luego me puedes ayudar? Este es mi instagram iwolf.sg99

Hi:

The same thing happend with me I cannt pair my apple watch series 3 with my iphone x. pls help me how do i pair it if u got any remidy.

Thanking you

I can´t, please help me. Try on mac and windows.

(Sorry about my English).

Thank you very much. I followed the steps one by one and...perfect.

Many thanks bro, great way

This worked for me. it is a reply on a similar forum, not my answer:

Mikis1Aug 14, 2019 12:50 PM(

in response to jkaye)

It can be easily solved in some basic steps without restoring anything neither watch or iDevice (Sorry for my simple English)

1. Download iOS 13 beta 5 from the internet (just type in google and you sure find something)

2. Choose your phone on the website and wait for download

3. Connect your phone and open iTunes

4. Once you are in your iDevice menu hit the update button BUT hold alt (In case of Windows CTRL) and then click it.

5. Choose downloaded file of iOS.

6. Wait for update to complete

7. Connect to your Apple watch and update them to newest software

And Voila! You're done and fully functional

Reason why is this still working is because Apple is still signing older betas and that's why you can still install it on your iPhone.

Have a nice day!