Hi, We have PCI storage device for which we use Kernel Driver. In kernel driver development we use getDeviceMemoryWithIndex to get IODeviceMemory and then we map it using IODeviceMemory->map then we fetch virtual memory using IOMemoryMap->getVirtualAddress. So my query is what's alternative for this in PCIDriverKit for developing DEXT. I found _CopyDeviceMemoryWithIndex api which seems similar to getDeviceMemoryWithIndex. But when I used this api then this is failing with error: 0xe00002cd (Device Not Open.) I'm doubting this failure because of IOPCIDevice->Open failure for which I have already created another thread [https://developer.apple.com/forums/thread/661711] to discuss this issue. There is no sample code available so I'm just following WWDC2020 presentation for Modernize PCI and SCSI drivers with DriverKit. My driver is loading and unloading on device connect/disconnect and able to fetch VID and DEVID from PCI registers. I'm using IOPCIDevice as provider and IOPCIMatch for driver matching. Any help or suggestion is really appreciated. Thanks

We have developed an IOPCIFamily based custom KEXT to communicate with Thunderbolt interface storage device. This KEXT is working fine with Apple machines with Intel CPUs in all types of machines (iMac, iMac Pro and MacBooks). We tested this KEXT with Apple Silicon M1 machine where we are observing crash for the very first command we send to the Thunderbolt device. We observed that there is difference in number of bits in Physical Address we use for preparing command PRPs. In Intel machines we get 28-Bit Physical Address whereas in M1 we are getting 36-Bit address used for PRPs. We use inTaskWithPhysicalMask api to allocate memory buffer we use for preparing command PRPs. Below are the options we have used for this: options: kIOMemoryPhysicallyContiguous | kIODirectionInOut capacity: 16kb physicalMask: 0xFFFFF000UL (We want 4kb aligned memory) According to below documentation, we have to use inTaskWithPhysicalMask api to get memory below 4gb. https://developer.apple.com/library/archive/documentation/Darwin/Conceptual/64bitPorting/KernelExtensionsandDrivers/KernelExtensionsandDrivers.html#//apple_ref/doc/uid/TP40001064-CH227-SW1 Some devices can only handle physical addresses that fit into 32 bits. To the extent that it is possible to use 64-bit addresses you should do so, but for these devices, you can either use IODMACommand or the initWithPhysicalMask method of IOBufferMemoryDescriptor to allocate a bounce buffer within the bottom 4 GB of physical memory. So just want to know what's the difference between Intel and ARM64 architecture with respect to physical memory access. Is there any difference between byte order for physical memory address..?? Crash log is given below: panic(cpu 0 caller 0xfffffe0016e08cd8): "apciec[0:pcic0-bridge]::handleInterrupt: Request address is greater than 32 bits linksts=0x99000001 pcielint=0x00020000 linkcdmsts=0x00000800 (ltssm 0x11=L0)\n" Debugger message: panic Memory ID: 0x6 OS release type: User OS version: 20C69 Kernel version: Darwin Kernel Version 20.2.0: Wed Dec 2 20:40:21 PST 2020; root:xnu-7195.60.75~1/RELEASEARM64T8101 Fileset Kernelcache UUID: 3E6AA74DF723BCB886499A5AAB34FA34 Kernel UUID: 48F71DB3-6C91-3E62-9576-3A1DCEF2B536 iBoot version: iBoot-6723.61.3 secure boot?: YES Paniclog version: 13 KernelCache slide: 0x000000000dbfc000 KernelCache base: 0xfffffe0014c00000 Kernel slide: 0x000000000e73c000 Kernel text base: 0xfffffe0015740000 Kernel text exec base: 0xfffffe0015808000 machabsolutetime: 0x12643a9c5 Epoch Time: sec usec Boot : 0x5fe06736 0x0009afbc Sleep : 0x00000000 0x00000000 Wake : 0x00000000 0x00000000 Calendar: 0x5fe067fd 0x0006569d CORE 0 recently retired instr at 0xfffffe0015971798 CORE 1 recently retired instr at 0xfffffe0015972c5c CORE 2 recently retired instr at 0xfffffe0015972c5c CORE 3 recently retired instr at 0xfffffe0015972c5c CORE 4 recently retired instr at 0xfffffe0015972c60 CORE 5 recently retired instr at 0xfffffe0015972c60 CORE 6 recently retired instr at 0xfffffe0015972c60 CORE 7 recently retired instr at 0xfffffe0015972c60 Panicked task 0xfffffe166ce9e550: 75145 pages, 462 threads: pid 0: kernel_task Panicked thread: 0xfffffe166d053918, backtrace: 0xfffffe306cb4b6d0, tid: 141 lr: 0xfffffe0015855f8c fp: 0xfffffe306cb4b740 lr: 0xfffffe0015855d58 fp: 0xfffffe306cb4b7b0 lr: 0xfffffe0015977f5c fp: 0xfffffe306cb4b7d0 lr: 0xfffffe0015969914 fp: 0xfffffe306cb4b880 lr: 0xfffffe001580f7e8 fp: 0xfffffe306cb4b890 lr: 0xfffffe00158559e8 fp: 0xfffffe306cb4bc20 lr: 0xfffffe00158559e8 fp: 0xfffffe306cb4bc90 lr: 0xfffffe0015ff03f8 fp: 0xfffffe306cb4bcb0 lr: 0xfffffe0016e08cd8 fp: 0xfffffe306cb4bd60 lr: 0xfffffe00166bc778 fp: 0xfffffe306cb4be30 lr: 0xfffffe0015f2226c fp: 0xfffffe306cb4be80 lr: 0xfffffe0015f1e2f4 fp: 0xfffffe306cb4bec0 lr: 0xfffffe0015f1f050 fp: 0xfffffe306cb4bf00 lr: 0xfffffe0015818c14 fp: 0x0000000000000000 Kernel Extensions in backtrace: com.apple.driver.AppleEmbeddedPCIE(1.0)[4F37F34B-EE1B-3282-BD8B-00009B954483]@0xfffffe00166b4000->0xfffffe00166c7fff dependency: com.apple.driver.AppleARMPlatform(1.0.2)[5CBA9CD0-E248-38E3-94E5-4CC5EAB96DE1]@0xfffffe0016148000->0xfffffe0016193fff dependency: com.apple.driver.IODARTFamily(1)[88B19766-4B19-3106-8ACE-EC29201F00A3]@0xfffffe0017890000->0xfffffe00178a3fff dependency: com.apple.iokit.IOPCIFamily(2.9)[5187699D-1DDC-3763-934C-1C4896310225]@0xfffffe0017c48000->0xfffffe0017c63fff dependency: com.apple.iokit.IOReportFamily(47)[93EC9828-1413-3458-A6B2-DBB3E24540AE]@0xfffffe0017c64000->0xfffffe0017c67fff com.apple.driver.AppleT8103PCIeC(1.0)[35AEB73B-D51E-3339-AB5B-50AC78740FB8]@0xfffffe0016e04000->0xfffffe0016e13fff dependency: com.apple.driver.AppleARMPlatform(1.0.2)[5CBA9CD0-E248-38E3-94E5-4CC5EAB96DE1]@0xfffffe0016148000->0xfffffe0016193fff dependency: com.apple.driver.AppleEmbeddedPCIE(1)[4F37F34B-EE1B-3282-BD8B-00009B954483]@0xfffffe00166b4000->0xfffffe00166c7fff dependency: com.apple.driver.ApplePIODMA(1)[A8EFA5BD-B11D-3A84-ACBD-6DB25DBCD817]@0xfffffe0016b0c000->0xfffffe0016b13fff dependency: com.apple.iokit.IOPCIFamily(2.9)[5187699D-1DDC-3763-934C-1C4896310225]@0xfffffe0017c48000->0xfffffe0017c63fff dependency: com.apple.iokit.IOReportFamily(47)[93EC9828-1413-3458-A6B2-DBB3E24540AE]@0xfffffe0017c64000->0xfffffe0017c67fff dependency: com.apple.iokit.IOThunderboltFamily(9.3.2)[11617399-2987-322D-85B6-EF2F1AD4A794]@0xfffffe0017d80000->0xfffffe0017e93fff Stackshot Succeeded Bytes Traced 277390 (Uncompressed 703968) ** System Information: Apple Silicon M1 BigSur 11.1 Model: Macmini9,1 Any help or suggestion is really appreciated. Thanks

We have developed a Kernel Extension based on SCSI Architecture Model Family for External USB Mass Storage devices which deals with IOSCSIBlockCommandsDevice, IOSCSIPeripheralDeviceType00 and IOBlockStorageService. This driver extends class IOSCSIPeripheralDeviceType00 and its provider class is: IOSCSIPeripheralDeviceNub. Now apple has released USBDriverKit so we have developed alternative DEXT which is based on BOT (Bulk-Only-Transfer) protocol. This newly developed DEXT works fine and we are able to communicate with storage device. We use IOUSBHostInterface as provider. We are able to get BOT Interface and setup Pipes to communicate with interface's end points and IOUSBHostPipe-IO call to send/receive data/response from/to device. Only issue we are facing is that storage device volume is not getting mounted. Also device is not getting listed in Disk Utility. In USBDriverKit documentation (https://developer.apple.com/documentation/usbdriverkit/iousbhostinterface)), it's specified that Open call gives exclusive device access to device when called in Start method and so we are doing this and Close called in Stop. But, in this scenario, even though driver works fine, device volume is not mounting. We have also tried without calling Open in Start but IOUSBHostPipe-IO api fails with error: kIOReturnNotReady Below are my queries related to USBDriverKit: Does USBDriverKit supports storage devices? Do we have to call IOUSBHostInterface-Open in Start and IOUSBHostInterface-Close in Stop?? Do we have to call IOUSBHostInterface-Open before sending command to device and IOUSBHostInterface-Close after command completion? If we claim Device Interface then how to release it and when?? If someone have pointers on how to resolve this issue, It would be helpful. Thanks in advance.

We have developed PCIFamily based KEXT which uses IOService-getProvider method to access Thunderbolt's device parent PCIBridge object. So just want to know what's alternative for this in PCIDriverKit. I have explored PCIDriverKit and DriverKit but could not find any alternative. Any help or suggestion is really appreciated. Thanks