Post not yet marked as solved
I have a text based action for iPhone and Mac Catalyst I am developing in Xcode 14.3.1 on macOS 13.4.1.
I have the container app, an action and an AppGroup defined.
I have confirmed that I can read the necessary shared defaults when the action launches.
At this point the UI for the action is a simple textview in which I hope to display a modified version of the text passed to the action in the NSExtensionItems.
I am not using a simulator. I am running the action directly using Xcode.
What is happening is that the ActionViewController viewDidLoad runs but no visible window opens.
In the console I see this as the action launches:
2023-07-05 18:27:23.692277-0700 XYZ[4634:279295] [ViewBridge] ViewBridge attempted to look up a hosted window with identifier 8E816BD5-67D3-402D-ADEB-AC59EDFA1F3B, but it was never registered.
2023-07-05 18:27:23.692408-0700 XYZ[4634:279295] [WindowHosting] UIScene property of UINSSceneViewController was accessed before it was set.
....
The last line above is repeated 12 times....
Any helpful ideas would be deeply appreciated!
Steve
Post not yet marked as solved
I have MacCatalyst app that a few weeks ago I successfully submitted and it was approved for both the iOS app version as well as a macOS version (AppStoreConnect)
Now when I use Archive in Xcode when the Organizer window opens the widget at top left is set to 'Other Items' additionally no version information is shown and the 'Validate' button is disabled...
I know this is probably ridiculous but I don't see (nor do I recall) how I tell Xcode to archive for macCatalyst or archive for iOS..
Can someone help me out here - please?
Post not yet marked as solved
Folks;
I have successfully implemented an iOS Action Extension which reads plain text from a user's selection.
Now I want to augment this to allow the user the call the action on RTF or HTML.
I have added NSExtensionActivationSupportsAttachmentsWithMinCount (1) and NSExtensionActivationSupportsAttachmentsWithMaxCount (3) to the ActivationRule.
I have updated the ActionViewController to handle the itemProviders...
BUT
guard let extensionItems = extensionContext?.inputItems as? [NSExtensionItem] else {...}
only shows 1 item of plainText...
What else do I need to do to allow my action to handle RTF or HTML?
Thanks for you time!
Steve
Post not yet marked as solved
I have setup and verified a sandbox account for testing.
I have received both email and text verification and received the email noting that the account has been enabled for two-factor.
Yet I receive the error below on both iOS and macOS devices.
Can someone shed some light on this matter?
Thanks!
Steve
iTunes Account creation not allowed
This Apple ID cannot be used with the iTunes Store at this time. Please try again later
I'm building an app for deployment on iPhone, iPad and Mac Catalyst. I am using Automatic Code Signing. Project build without a single warning of any kind...
Debugging and running the app on both iPhone and iPad is working fine both in the simulators as well as on various test devices.
I have now turned to debugging on my Mac (M1Pro-MBP). I have run Clean many times....When I set the run destination to My Mac Catalyst and run I immediately see a dialog stating:
"The LaunchServices launcher has returned an error. Please check the system logs for the underlying cause of the error."
There is button to reveal details. Those details are shown below.
At the moment I am under the impression that this must be a relatively straightforward configuration issue which I have overlooked....
The app does contain an action and if I build and run only the action with Mac Catalyst as the destination it runs fine..
I only hit the error when I try to run the container app with embedded action with my Mac as the run destination....
Can anyone shed any light on this matter?
All thoughts appreciated!
Steve
Domain: IDELaunchErrorDomain
Code: 20
Recovery Suggestion: The LaunchServices launcher has returned an error. Please check the system logs for the underlying cause of the error.
User Info: {
DVTErrorCreationDateKey = "2023-07-19 14:36:14 +0000";
DVTRadarComponentKey = 968756;
IDERunOperationFailingWorker = IDELaunchServicesLauncher;
}
--
The operation couldn’t be completed. Launch failed.
Domain: RBSRequestErrorDomain
Code: 5
Failure Reason: Launch failed.
--
Launchd job spawn failed
Domain: NSPOSIXErrorDomain
Code: 153
--
Analytics Event: com.apple.dt.IDERunOperationWorkerFinished : {
"device_model" = "MacBookPro18,3";
"device_osBuild" = "13.4.1 (22F82)";
"device_platform" = "com.apple.platform.macosx";
"launchSession_schemeCommand" = Run;
"launchSession_state" = 1;
"launchSession_targetArch" = arm64;
"operation_duration_ms" = 172;
"operation_errorCode" = 20;
"operation_errorDomain" = IDELaunchErrorDomain;
"operation_errorWorker" = IDELaunchServicesLauncher;
"operation_name" = IDERunOperationWorkerGroup;
"param_consoleMode" = 0;
"param_debugger_attachToExtensions" = 0;
"param_debugger_attachToXPC" = 1;
"param_debugger_type" = 3;
"param_destination_isProxy" = 0;
"param_destination_platform" = "com.apple.platform.macosx";
"param_diag_MainThreadChecker_stopOnIssue" = 0;
"param_diag_MallocStackLogging_enableDuringAttach" = 0;
"param_diag_MallocStackLogging_enableForXPC" = 1;
"param_diag_allowLocationSimulation" = 1;
"param_diag_checker_tpc_enable" = 1;
"param_diag_gpu_frameCapture_enable" = 0;
"param_diag_gpu_shaderValidation_enable" = 0;
"param_diag_gpu_validation_enable" = 0;
"param_diag_memoryGraphOnResourceException" = 0;
"param_diag_queueDebugging_enable" = 1;
"param_diag_runtimeProfile_generate" = 0;
"param_diag_sanitizer_asan_enable" = 0;
"param_diag_sanitizer_tsan_enable" = 0;
"param_diag_sanitizer_tsan_stopOnIssue" = 0;
"param_diag_sanitizer_ubsan_stopOnIssue" = 0;
"param_diag_showNonLocalizedStrings" = 0;
"param_diag_viewDebugging_enabled" = 1;
"param_diag_viewDebugging_insertDylibOnLaunch" = 1;
"param_install_style" = 0;
"param_launcher_UID" = 2;
"param_launcher_allowDeviceSensorReplayData" = 0;
"param_launcher_kind" = 0;
"param_launcher_style" = 99;
"param_launcher_substyle" = 8192;
"param_runnable_appExtensionHostRunMode" = 0;
"param_runnable_productType" = "com.apple.product-type.application";
"param_testing_launchedForTesting" = 0;
"param_testing_suppressSimulatorApp" = 0;
"param_testing_usingCLI" = 0;
"sdk_canonicalName" = "macosx13.3";
"sdk_osVersion" = "13.3";
"sdk_variant" = iosmac;
}
--
System Information
macOS Version 13.4.1 (c) (Build 22F770820d)
Xcode 14.3.1 (21815) (Build 14E300c)
Timestamp: 2023-07-19T08:36:14-06:00
I am examining the ability of NaturalLanguage to identify placeNames.
I ran across the example code in the developer documentation here:
https://developer.apple.com/documentation/naturallanguage/identifying_people_places_and_organizations
When I execute this example exactly as stated it does not function as expected.
Running Xcode 14.3.1 on macOS Ventura 13.4.
The code does not find a single tag of any kind in the sample text.
Can someone offer an explanation?
Post not yet marked as solved
Folks;
Running on a Developer Transition Kit - (A12Z) macOS 11.2 - Xcode 12.3
I have built a free to download Mac App which has a variety of in-app purchases; some are auto-renewing subscriptions, some are non-consumable.
(all of these in-app purchases have been approved by Apple)
I am experiencing difficulty testing in the sandbox.
I have logged out of my user account in the Mac App Store.
I have removed the existing Container folder from user’s Library folder.
I have created a brand new testing account in App Store Connect.
I have done a clean and build in Xcode.
When I then run the app I am prompted to ‘Sign in to use this application on this computer’.
(“AppName” was purchased using the App Store on another computer….)
I enter the new AppleID I just set up in App Store Connect and then I am prompted for a password.
After I supply the password the app crashes:
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
dyld: Using shared cache: 775BB65E-F213-3A39-ACF0-7343BCDE1E6C
Library not loaded: @executable_path/../Frameworks/……..
Referenced from: /Users/USER/Library/Developer/Xcode/DerivedData/AppName-hcuqdwzeykfjvqfdldsnjiocbxtj/Build/Products/Debug/AppName.app/Contents/MacOS/AppName
Reason: image not found
If I immediately re-run the application at this point I get a successful launch....
As part of my app’s normal launch I process the receipt.
During this successful re-launch the receipt is found and is correctly processed. It correctly determines that no in-app purchases have yet been made.
In the app code I successfully perform an SKProductRequest (I receive the correct information back).
Based on this SKProductRequest success I then attempt to make an in-app purchase which uses the product information from the SKProductRequest
I am prompted to ‘Sign in to the App Store’
(If you have an Apple ID, sign in with it here. [Environment: Sandbox]) Buttons: Cancel & Buy - there is a textfield to enter an Apple ID
(the pre-filled in Apple ID is NOT the Apple ID I submitted during the initial launch….
When I click the ‘Buy’ I am prompted for the password.
When I supply the password I then prompted with a different dialog window ‘Sign In to the App Store’
(If you have an Apple ID, sign in with it here. [Environment: Sandbox]) Buttons: Cancel & Buy - no textfield to enter an Apple ID
If I click the ‘Buy’ button, the dialog window disappears for a second or two and then re-appears
After the 4th such 'Buy' click I see an error logged by SKPaymentQueue:
<SKPaymentQueue: 0x600001a13b80>: Payment completed with error: Error Domain=ASDErrorDomain Code=500 "Unhandled exception"
UserInfo={NSUnderlyingError=0x600001612700 {Error Domain=AMSErrorDomain Code=306 "Reached max retry count"
UserInfo={NSLocalizedDescription=Reached max retry count, NSLocalizedFailureReason=Task reached max retry count (3 / 3);}},
NSLocalizedFailureReason=An unknown error occurred, NSLocalizedDescription=Unhandled exception}
Can anyone provide some clarity as to what I am doing wrong? Any thoughts appreciated!!
Steve
Post not yet marked as solved
The specs state that the resolution for the video should be 886x1920 (or 1920x886).How do I create a video with this resoultion?I have looked at QuickTime Player, iMovie, and FinalCutPro and I don't see a way to produce a video with this resolution.BTW: I don't have an iPhoneX of any kind. Does this fact alone mean I cannot produce a 6.5 inch App Preview?It doesn't seem like it should but maybe..??I hope I am just missing something easy but in the programs mentioned above I find only 480p, 720p, 1080p, and 4K.Any guidance (a link to a "how to" with tools required?) would be really appreciated!
Post not yet marked as solved
Hello There;
Using macOS 12.5 & Xcode 13.4 I am trying to subclass CNContact and bumping into an issue that I do not understand!
class MyContact: CNContact {
var newVariable :String = ""
...
}
I have loaded contactArray:[CNContact]
now as I iterate over this array I would like to typecast the instance of CNContact to an instance of MyContact.
for thisContact in contactArray {
if let myK:MyContact = thisContact as? MyContact {
//do something
}
}
program flow simply never proceeds into the if let statement...
if I try to force this issue:
let myK:MyContact = thisContact as! MyContact
I get the error:
Could not cast value of type 'CNContact' (0x2057a35b8) to 'XYZ.MyContact' (0x102484490).
Please help me accomplish my goal - what am I not understanding here?
All help appreciated!
Steve
Post not yet marked as solved
M1Pro running macOS 12.5 & Xcode 13.4.1
developing a macOS application using storyboards
simple beginning to an app:
appDelegate, a custom windowController, and a custom viewController
windowContent set in IB using drag
no error reported during build
when run:
windowWillLoad is called
viewController viewDidLoad is called
window didLoad is called
appDelegate applicationDidFinishLaunching is called
window is drawn on screen
but nothing appears in the window
view has 2 verticalStackViews, a tableView, and a horizontalStackView
I'm stumped....
Any thoughts appreciated on how to track this down!
Post not yet marked as solved
Folks;
I have a sandboxed macOS app that provides text handling via a service.
This app has been for sale in the Mac App Store for several years.
The basic mechanics of the service work just fine…
To set the scene:
user opens a file in some fashion
user makes a text selection within this open file
user invokes my app’s service
In the course of development of this service, I now have established an NSURL (file) for the user’s document.
However, when I later attempt to open this url I get a sandbox error: client lacks entitlements? for path: ….
NOTE: It does not matter where the file is located!
My app already has this entitlement: com.apple.security.files.user-selected.read-write
My question: Is there an entitlement that will permit me to programmatically open this fileURL?
Post not yet marked as solved
I have an Objective-C macOS app which provides a service that provides unique services on selected text.
This app has been for sale in the Mac App Store for several years.
The app registers as service provider during 'appDidFinishLaunching' with: [[NSApplication sharedApplication] setServicesProvider:self];
When my service is invoked it uses the standard service method:
(void)serviceName:(NSPasteboard *)pboard userData:(NSString *)userData error:(NSString **)error
In the body of this standard service method the contents of the NSPasteboard (pboard) are examined and consumed by my app.
- (void) kudosService:(NSPasteboard *)pboard userData:(NSString *)userData error:(NSString **)error; {
if ([pboard pasteboardItems].count==0) { return; }
NSPasteboardItem *pI = [pboard pasteboardItems][0];
NSLog(@"pI:%@",pI.types );
for (NSString *uti in pI.types) {
NSLog(@"uti:%@ string:%@",uti, [pI stringForType:uti] );
}
...
}
Something has changed with Preview app; at this point I'm inclined to think the change occurred with version 11.
Console output for Preview
pI:(
"public.utf8-plain-text",
"public.rtf",
"public.utf16-external-plain-text"
)
uti:public.utf8-plain-text string:(null)
uti:public.rtf string:(null)
uti:public.utf16-external-plain-text string:(null)
This is the output regardless of whether or not the user has a mere text selection OR has formally 'Cop(ied)' [Cmd-C] the text in the Preview window!
Please NOTE if I open the exact same .pdf document in Safari and invoke the service from Safari I see the expected Console output:
pI:(
"public.utf8-plain-text"
)
uti:public.utf8-plain-text string:The Best Gluten-Free Chocolate Cake
When did this change in Preview behavior occur?
Can anyone point me to some documentation, which I have obviously overlooked, that would shed some light on this matter!
Post not yet marked as solved
macOS 10.15.6 - Xcode 11.7
This app has been in App Store for over a year.
The code in question here has been working and tested.
It no longer functions as before...
Attempting to test a brand new install using a sandbox account on a Mac.
Receipt validation is run in main.m with:
...
return NSApplicationMain(argc, (const char **)argv);
}
} @catch (NSException *e) {
exit(173);
}
Delete the appropriate folder in ~/../Containers
Clean - Build - Run
When Run the exception is trapped and the prompt for sandbox credentials is shown. Upon completion of the credentials I receive the 'app is damaged and cannot be opened...'
I have logged out, I have rebooted, I have tried with a different sandbox account - all to no avail.
Any thoughts would be deeply appreciated!
Thanks for your time!
Steve
Post not yet marked as solved
Could someone please clarify how to access SmartGroups using the CNContacts framework?
SwampDog.