I understand that MapKit automatically sizes the font based on the system Dynamic Type size. The thing is, the default font size is plenty legible for me system wide except for some type in MapKit, while other type in MapKit is already plenty big. For instance, the stream names are much harder to read than they should be by default. And if I increase the system Dynamic Type size, then it makes some MapKit text much larger than needed, while the stream text can still be hard to read. So is there anyway to override or adjust font sizes in MapKit? I'd like to be able to apply percentages to Dynamic Type suggestions. Like for streams, I'd like to scale it somewhere between 133% and 150%. The smallest Dynamic Type is size is .caption2 at 11 points with default settings. With default Dynamic Type settings, it looks like MapKit is drawing stream text around 7 points.

how to add an offline map (longitude and latitude) please help

I have tried to make colored annotations in mapView (shown in the commented sections) but they always appear in black. Any help would be appreciated. func mapView(_ mapView: MKMapView, viewFor annotation: MKAnnotation) -> MKAnnotationView? { let annotationView = MKAnnotationView(annotation: annotation, reuseIdentifier: "TempAnnotationView") annotationView.canShowCallout = true annotationView.rightCalloutAccessoryView = UIButton(type: .detailDisclosure) let configuration = UIImage.SymbolConfiguration(pointSize: 10, weight: .thin, scale: .default) if annotation.title == "Start" { // let config = UIImage.SymbolConfiguration.preferringMulticolor() // let image = UIImage(systemName: "flag.fill", withConfiguration: config) // // palette // let config2 = UIImage.SymbolConfiguration(paletteColors: [.systemRed, .systemGreen, .systemBlue]) // let image2 = UIImage(systemName: "person.3.sequence.fill", withConfiguration: config2) // // hierarchical symbols // let config3 = UIImage.SymbolConfiguration(hierarchicalColor: .systemIndigo) // let image3 = UIImage(systemName: "square.stack.3d.down.right.fill", withConfiguration: config3) // // color // let image4 = UIImage(systemName: "cone.fill")?.withTintColor(.systemRed, renderingMode: .alwaysTemplate) // annotationView.image = image4 annotationView.image = UIImage(systemName: "poweron", withConfiguration: configuration) } return annotationView }

The beacon device is very close to the phone(ios17). But the RSSI obtained from the beacon information returned by the locationManager's didRange function is always 0. Why? log: didRange [CLBeacon (uuid:D4C3CCC0-29FB-11E5-884F-0002A5D5C51B, major:0, minor:9, proximity:0 +/- -1.00m, rssi:0, timestamp:2024-02-15 06:48:57 +0000)] didRange [CLBeacon (uuid:D4C3CCC0-29FB-11E5-884F-0002A5D5C51B, major:0, minor:9, proximity:0 +/- -1.00m, rssi:0, timestamp:2024-02-15 06:48:58 +0000)] didRange [CLBeacon (uuid:D4C3CCC0-29FB-11E5-884F-0002A5D5C51B, major:0, minor:9, proximity:0 +/- -1.00m, rssi:0, timestamp:2024-02-15 06:48:59 +0000)] didRange [CLBeacon (uuid:D4C3CCC0-29FB-11E5-884F-0002A5D5C51B, major:0, minor:9, proximity:0 +/- -1.00m, rssi:0, timestamp:2024-02-15 06:49:00 +0000)]

I need to hide or remove gps indicator from status bar/ navigation bar on background mode. I have already used locationManager?.showsBackgroundLocationIndicator = false but it doesn't when user select "While using the app".

I have a LookAroundPrewiew in a frame which itself is already small. On top of that is the LookAroundPreview automatically appended onto the preview. In fact it doesn’t really bother me per se, but it’s that my view doesn’t have much space. So is it possible customize the view by removing the text ? And the Apple Maps text at the bottom of the image which is fairly small isn’t a problem for me.

Hi guys! I am trying to extract Location Services data from an iPhone running developer mode, and have installed the "Location Services for iOS" Profile that can be found on the Profiles and Logs page. I have also read the Instructions PDF, and done the setup. I am having a hard time finding the actual logs after exporting the sysdiagnose folder. The folder is quite big and complex. Can someone please help me, and tell me where I can find it? Thanks!

I would love to know if there is a way to manipulate how the scene size is set initially. I see that we have mapkit.MapSize(width, height) at our disposal but there isn't any clear documentation on its use case in the MapKit docs. I had to do some hacky workaround where I had to set the size like this. ` size = new mapkit.MapSize(1000, 600) map = new mapkit.Map("map"); map._impl._scene._size = size ` Is there a better way to handle this? On safari it is not setting correctly.

although the Documentation implies that multiple CLLocationManager running in parallel should not intervene one another. I find some evidence that they do: for example a Medium posts title: "Single vs Multi CLLocationManager solutions" states: In multi instances of CLLocationManagers solution, there is the risk of collision where a feature / settings can impacts across instances of CLLocationManagers. another Medium post titled: "Measuring Differences of Degrees Using CLLocation’s CLHeading" states: however an important condition is that Apple recommends you initialize only ONE instance within your application at a time. This is because multiple instances running simultaneously has the effect of causing interference and distorting the data so is there some risk using CLLocationManager in parallel. is the configuration properties such as desiredAccuracy and distanceFilter can interrupt different CLLocationManagers running in parallel?

This problem cannot be solved and the review is not approved

Hello, We have an iOS application which detects when the user starts driving by detecting an USB iBeacon which is installed in the car of the users. For that we are monitoring the iBeacon region with CoreLocation and we are detecting the iBeacon when the locationManager(_:didDetermineState:for:) delegate method is called. We received some reports from a user that the iBeacon monitoring stops working when a specific BT device (specifically a hearing aid) is connected to the iPhone. The hearing aid is connected in the iOS Settings > Bluetooth page, similar how a regular BT headset is connected. When the hearing aid is disconnected then the iBeacon monitoring resumes and starts working properly again. We can't reproduce this issue with our BT headsets, so maybe the problem is specific to just some BT device connections? The advertising time interval of the iBeacon is 100mS as requested in the Apple documentation. Previously we had problems when a phone call was made through a BT headset when we used an advertising interval > 100mS in order to improve the battery usage of the iBeacon. But we changed to use an USB iBeacon, so the battery usage is not a concern anymore. Did somebody experience similar issues or has a solution? Specifically, can some specific BT connections set up in iOS Settings > Bluetooth page interfere with the iBeacon monitoring when using CoreLocation? Thank you very much!

If I load a map while my device is online, I can access this map offline via the default caching mechanism. I need to be able to identify if a map cache is unavailable when my device is offline and react accordingly. For example, if I am offline and I load a map and the cache is unavailable i.e the map tiles are greyed out, I want to display a message to the user. The AppKit delegate had a method to identify when a map loaded but I do not see an equivilient way of doing this in Map. Any ideas?

I need to fetch nearby places within a 3 km radius using the Apple Maps API

Hi I want to inquire about the data returned from CoreLocation update and whether it is accurate. I am attempting to retrieve the local address in Japan based on the postal code, and I have observed differences in the returned data. When calling the information retrieval function with the postal code 3360042, the returned data is as follows: Locality: さいたま市 SubLocality: 南区 Corresponding to Japan Post: https://www.post.japanpost.jp/cgi-zip/zipcode.php?pref=11&city=1111080&id=38748 the displayed information on the website includes "Locality + SubLocality". When calling the information retrieval function with the postal code 1350064, the returned data is as follows: Locality: 江東区 SubLocality: 青海 Corresponding to Japan Post japan post: https://www.post.japanpost.jp/cgi-zip/zipcode.php?pref=11&city=1111080&id=38748 the displayed information on the website only includes "Locality" not includes SubLocality. Is it possible that CoreLocation has been updated? The current data seems to deviate from the design of our application. Please provide me with a solution to determine when to use "Locality + SubLocality" versus just "Locality" to obtain the local address. Thank.

I have a Python script that returns a scan result with scanForNetworksWithName using CoreWLAN with PyObjC. It provides info on ssid and such like the airport command. When upgrading to MacOS 14.4 however SSID is now Null. I read this was due to changes in permissions and location services needed to be enabled. I have enabled access to location services and I am able to use CoreLocation to get a location however I still do now see the SSID. Here is my script, that does both location and scan: import CoreWLAN import CoreLocation from time import sleep import re wifi_interface = CoreWLAN.CWInterface.interface() networks, error = wifi_interface.scanForNetworksWithName_error_(None, None) location_manager = CoreLocation.CLLocationManager.alloc().init() location_manager.startUpdatingLocation() max_wait = 60 # Get the current authorization status for Python for i in range(1, max_wait): authorization_status = location_manager.authorizationStatus() if authorization_status == 3 or authorization_status == 4: print("Python has been authorized for location services") break if i == max_wait-1: exit("Unable to obtain authorization, exiting") sleep(1) coord = location_manager.location().coordinate() lat, lon = coord.latitude, coord.longitude print("Your location is %f, %f" % (lat, lon)) print(f"{'SSID' : >32} {'BSSID' : <17} RSSI CHANNEL HT CC SECURITY") for i in networks: print(f"{'SSID' : >32} {'BSSID' : <17} RSSI CHANNEL HT CC SECURITY") for i in networks: print(f"{i.ssid() or '' : >32} {i.bssid() or '' : <17} {i.rssiValue() : <4} {i.channel() : <6}") It worked fine in MacOS 13.6 but with MacOS 14.4 I have the null SSID issue. We went through something similar with MacOS 10.15 where BSSID became Null. At the time I couldn't find a workaround, but sometime around MacOS 13.x I was able to generate the request for location services. After granting the request I was able to see BSSID again. It seems like we have a similar bug to this again. Thread about the BSSID issue: https://github.com/ronaldoussoren/pyobjc/issues/484

If they had used .task they could have removed the class LocationsHandler: ObservableObject and simply done: struct ContentView: View { @State var lastLocation: CLLocation? var body: some View { VStack { ... } .task { let updates = CLLocationUpdate.liveUpdates() for try await update in updates { if let loc = update.location { self.lastLocation = loc } } } And saved themselves about 20 or so lines of code. .task was added in the year before so it isn't the case that it wasn't available to the CoreLocation team yet. To wrap async/await in a Combine's ObservableObject is very strange. They could have also used @AppStorage instead of UserDefaults and saved another few lines. To be honest this is some of the strangest SwiftUI code I've seen.

Any suggestions on how to display multi-polygons within MapKit for SwiftUI(https://developer.apple.com/documentation/mapkit/mappolygon)? At the moment it is not supported and only supported by MapKit for UIKit(https://developer.apple.com/documentation/mapkit/mkmultipolygon) . Any idea on how to bridge these over?

Hi, I've discovered that my app's location can be manipulated using iMyFone. I've searched extensively online for solutions, but haven't found anything effective. Do you have any insights on how I can prevent this manipulation using Swift code? Thanks for your help in advance.

I have not tested on the lower version but it seems like it is not functioning properly on iOS 17.4. It does work with CircularGeographicCondition but not with BeaconIdentityCondition. I am testing with this example code by Apple. I have typed proper UUID of my iBeacon device but it is never discovered. Some other posts say that it has not been working since iOS 17.3.1. Anyone having the same issue with me?

Hello there, Mainland china user(s) have trouble accessing MapKitJS, keeps returning HTTP 401 unauthorized for https://cdn.apple-mapkit.com/ma/bootstrap?apiVersion=2&mkjsVersion=5.77.35. The same valid JWT perfectly works for users rest of the world. May i know is there any special handling needed for accessing mapkitJS on web from mainland china compared to rest of the world. Advises are highly appreciated.