Lots of difficulties with Xcode 15.2 trying to connect to iPhone

Question

Created Feb ’24

Replies 2

Boosts 0

Views 1.7k

Participants 2

Xcode Version 15.2 in general is very, very slow when debugging. If I get to that, often, xcode just shows a message "Preparing iPhone 15 Pro Joride. Xcode will continue when the operation completes" This box will stay there for at least 3 min. Then it is follow by a message about a developer image not being able to get mounted: "Previous preparation error: The developer disk image could not be mounted on this device.. Error mounting image: 0xe8000115 (kAMDMobileImageMounterDevicePropertyQueryFailure: Failed to query device property.)"

If I eventually do manage to debug my app, it is soooooo slow. The launchscreen is there for easily 20 seconds (I'm guessing debugger is trying to attach during this time). When there are breakpoints present at all, things just occur very very slowly, expecially when trying to PO variables. The app itself runs fine though.

I've noticed there is a checkbox for this device that says 'Connect via network'. This clearly seems to be broken for my combination of factors, so I wanted to uncheck it. Not possible!

For those of use with a similar experience, any suggestions? (I did try to power cycle both computer and iPhone, but that did not change much. Both devices are connected to the same home wifi which has no special setup or restrictions)

Boost

Answer 1

Joride OP

Feb ’24

I've now been unable to load any app on my device. Here is the exact error I get:

Error mounting image: 0xe8000115 (kAMDMobileImageMounterDevicePropertyQueryFailure: Failed to query device property.)

The developer disk image could not be mounted on this device.
Domain: com.apple.dt.CoreDeviceError
Code: 12040
Failure Reason: Error mounting image: 0xe8000115 (kAMDMobileImageMounterDevicePropertyQueryFailure: Failed to query device property.)
User Info: {
    DDIPath = "/Users/Joride/Library/Developer/DeveloperDiskImages/iOS_DDI.dmg";
    DVTErrorCreationDateKey = "2024-02-07 12:09:32 +0000";
    DeviceIdentifier = "625254F9-0CB7-4135-B261-D73FA85274F3";
    IDERunOperationFailingWorker = IDEInstallCoreDeviceWorker;
    NSURL = "file:///Users/Joride/Library/Developer/DeveloperDiskImages/iOS_DDI.dmg";
    Options =     {
        MountedBundlePath = "file:///private/var/tmp/CoreDevice_DDI_Staging_501/625254F9-0CB7-4135-B261-D73FA85274F3/";
        UseCredentials = 0;
    };
    "com.apple.dt.DVTCoreDevice.operationName" = enablePersonalizedDDI;
}
--
Error mounting image: 0xe8000115 (kAMDMobileImageMounterDevicePropertyQueryFailure: Failed to query device property.)
Domain: com.apple.mobiledevice
Code: -402652907
User Info: {
    FunctionName = AMDeviceRemoteMountPersonalizedBundle;
    LineNumber = 2108;
}
--
Failed to initialize remote device attributes: 0xe8000115 (kAMDMobileImageMounterDevicePropertyQueryFailure: Failed to query device property.)
Domain: com.apple.mobiledevice
Code: -402652907
User Info: {
    FunctionName = "-[PersonalizedImage mountImage:]";
    LineNumber = 1772;
}
--
Failed to retrieve personalization identifiers: 0xe8000115 (kAMDMobileImageMounterDevicePropertyQueryFailure: Failed to query device property.)
Domain: com.apple.mobiledevice
Code: -402652907
User Info: {
    FunctionName = "-[PersonalizedImage initializeRemoteDeviceAttributes:]";
    LineNumber = 1367;
}
--

Event Metadata: com.apple.dt.IDERunOperationWorkerFinished : {
    "device_isCoreDevice" = 1;
    "device_model" = "iPhone16,1";
    "device_osBuild" = "17.3 (21D50)";
    "device_platform" = "com.apple.platform.iphoneos";
    "dvt_coredevice_version" = "355.7.7";
    "dvt_mobiledevice_version" = "1643.60.2";
    "launchSession_schemeCommand" = Run;
    "launchSession_state" = 1;
    "launchSession_targetArch" = arm64;
    "operation_duration_ms" = 230972;
    "operation_errorCode" = "-402652907";
    "operation_errorDomain" = "com.apple.dt.CoreDeviceError.12040.com.apple.mobiledevice";
    "operation_errorWorker" = IDEInstallCoreDeviceWorker;
    "operation_name" = IDERunOperationWorkerGroup;
    "param_debugger_attachToExtensions" = 0;
    "param_debugger_attachToXPC" = 1;
    "param_debugger_type" = 3;
    "param_destination_isProxy" = 0;
    "param_destination_platform" = "com.apple.platform.iphoneos";
    "param_diag_MainThreadChecker_stopOnIssue" = 0;
    "param_diag_MallocStackLogging_enableDuringAttach" = 0;
    "param_diag_MallocStackLogging_enableForXPC" = 1;
    "param_diag_allowLocationSimulation" = 1;
    "param_diag_checker_tpc_enable" = 1;
    "param_diag_gpu_frameCapture_enable" = 0;
    "param_diag_gpu_shaderValidation_enable" = 0;
    "param_diag_gpu_validation_enable" = 0;
    "param_diag_memoryGraphOnResourceException" = 0;
    "param_diag_queueDebugging_enable" = 1;
    "param_diag_runtimeProfile_generate" = 0;
    "param_diag_sanitizer_asan_enable" = 0;
    "param_diag_sanitizer_tsan_enable" = 0;
    "param_diag_sanitizer_tsan_stopOnIssue" = 0;
    "param_diag_sanitizer_ubsan_stopOnIssue" = 0;
    "param_diag_showNonLocalizedStrings" = 0;
    "param_diag_viewDebugging_enabled" = 1;
    "param_diag_viewDebugging_insertDylibOnLaunch" = 1;
    "param_install_style" = 0;
    "param_launcher_UID" = 2;
    "param_launcher_allowDeviceSensorReplayData" = 0;
    "param_launcher_kind" = 0;
    "param_launcher_style" = 99;
    "param_launcher_substyle" = 8192;
    "param_runnable_appExtensionHostRunMode" = 0;
    "param_runnable_productType" = "com.apple.product-type.application";
    "param_structuredConsoleMode" = 1;
    "param_testing_launchedForTesting" = 0;
    "param_testing_suppressSimulatorApp" = 0;
    "param_testing_usingCLI" = 0;
    "sdk_canonicalName" = "iphoneos17.2";
    "sdk_osVersion" = "17.2";
    "sdk_variant" = iphoneos;
}
--


System Information

macOS Version 14.3 (Build 23D56)
Xcode 15.2 (22503) (Build 15C500b)
Timestamp: 2024-02-07T13:09:32+01:00

0

Answer 2

DTS Engineer OP

Apple

Feb ’24

I've noticed there is a checkbox for this device that says 'Connect via network'. This clearly seems to be broken for my combination of factors, so I wanted to uncheck it.

There is a bunch of backstory, and some potentially useful tips, about this in the Xcode 15, how to uncheck "Connect via network" for physical device? MegaThread™.

Share and Enjoy
—
Quinn “The Eskimo!” @ Developer Technical Support @ Apple
let myEmail = "eskimo" + "1" + "@" + "apple.com"

0