Overview

My app is iOS 17 targeted and uses a card-based list view with Delete and Duplicate trailing and leading swipe actions. The Delete and Duplicate buttons display appropriately on iPad with rounded corners, height equal to card height and width expanding to fill the leading or trailing space created by the swipe action (with padding between the edge of the button and the edge of the card). See screenshot: However, on iPhone (a) the button heights extend from the top of the first card to the bottom of the last card in the scrolled list, (b) the width expands to completely fill the space without padding between the button and the cards, and (c) only the leading (or trailing) top and bottom corners are rounded (respectively). See screenshots: The swipe action modifiers are standard and applied on a CardView in the following view chain (NavigationSplitView -> ZStack -> Group -> ZStack -> List -> ForEach -> ZStack -> CardView | NavigationLink with empty view as workaround for a toolbar bug. Here are the swipe actions : .swipeActions(edge: .trailing, allowsFullSwipe: false) { Button(role: .destructive, action: { // Perform "Delete" action }) { Label("Delete", systemImage: "trash") } } .swipeActions(edge: .leading, allowsFullSwipe: false) { Button(action: { // Perform "Duplicate" action }) { Label("Duplicate", systemImage: "doc.on.doc") } } I’ve tried embedding the buttons within a Geometry reader to explicitly contain the height and width but this results in a compiler error and I suspect that the solution might be a lot simpler. Any thoughts on a fix or an explanation of why the buttons display properly on iPad device and simulator but not on iPhone device or simulator is appreciated. Thanks in advance!

I am a watchOS 10.0 device, try to open the developer mode, according to the official website to enter the Settings > Privacy > Developer Mode. But I don't see the developer mode option, how do I turn on the developer mode for watchOS 10.0 device?

Consider a scenario where you are in an active voice call and your iPhone is switched off due to low / zero battery charge. You plug in to charging and wait for iPhone to turn on. Now check the call records / phone app (Recents) and notice that previous call entry is missing in the list. Is this a bug I noticed? Or is it design behavior and requires improvement? Seems like call entry is recorded only after the call is ended (or dropped) voluntary by the user. In case of iPhone is turned off due to low battery condition, code that audits this phone activity never gets a chance to run.

Does anybody encounter the same problem when using Animation Hitches from the instruments? It's stuck everytime i finish recording in the meanwhile all other instruments works just fine. Here is a picture attached. I do have to use Force Quit.

I just updated Xcode to 15.3, now I get the error below the trying to test app on iPad running 17.4.1, before update it worked fine on 17.2 and still works on 17.2 simulator. any advice on how to fix this? I am new to iOS development and have no clue where to start. Unable to Install “MullingsApp” Domain: IXUserPresentableErrorDomain Code: 1 Recovery Suggestion: Failed to load Info.plist from bundle at path /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.sdEi0U/extracted/MullingsApp.app/Frameworks/FirebaseFirestoreInternal.framework; Extra info about "/var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.sdEi0U/extracted/MullingsApp.app/Frameworks/FirebaseFirestoreInternal.framework/Info.plist": Couldn't stat /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.sdEi0U/extracted/MullingsApp.app/Frameworks/FirebaseFirestoreInternal.framework/Info.plist: No such file or directory User Info: { DVTErrorCreationDateKey = "2024-04-15 22:01:23 +0000"; IDERunOperationFailingWorker = IDEInstallCoreDeviceWorker; } Unable to Install “MullingsApp” Domain: IXUserPresentableErrorDomain Code: 1 Recovery Suggestion: Failed to load Info.plist from bundle at path /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.sdEi0U/extracted/MullingsApp.app/Frameworks/FirebaseFirestoreInternal.framework; Extra info about "/var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.sdEi0U/extracted/MullingsApp.app/Frameworks/FirebaseFirestoreInternal.framework/Info.plist": Couldn't stat /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.sdEi0U/extracted/MullingsApp.app/Frameworks/FirebaseFirestoreInternal.framework/Info.plist: No such file or directory User Info: { IDERunOperationFailingWorker = IDEInstallCoreDeviceWorker; } Failed to install the app on the device. Domain: com.apple.dt.CoreDeviceError Code: 3002 User Info: { NSURL = "file:///Users/robertmullings/Library/Developer/Xcode/DerivedData/MullingsApp-aiwwvdfrhularzffxehlfhgzdnjo/Build/Products/Debug-iphoneos/MullingsApp.app/"; } Unable to Install “MullingsApp” Domain: IXUserPresentableErrorDomain Code: 1 Failure Reason: Please try again later. Recovery Suggestion: Failed to load Info.plist from bundle at path /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.sdEi0U/extracted/MullingsApp.app/Frameworks/FirebaseFirestoreInternal.framework; Extra info about "/var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.sdEi0U/extracted/MullingsApp.app/Frameworks/FirebaseFirestoreInternal.framework/Info.plist": Couldn't stat /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.sdEi0U/extracted/MullingsApp.app/Frameworks/FirebaseFirestoreInternal.framework/Info.plist: No such file or directory Failed to load Info.plist from bundle at path /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.sdEi0U/extracted/MullingsApp.app/Frameworks/FirebaseFirestoreInternal.framework; Extra info about "/var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.sdEi0U/extracted/MullingsApp.app/Frameworks/FirebaseFirestoreInternal.framework/Info.plist": Couldn't stat /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.sdEi0U/extracted/MullingsApp.app/Frameworks/FirebaseFirestoreInternal.framework/Info.plist: No such file or directory Domain: MIInstallerErrorDomain Code: 35 User Info: { FunctionName = "-[MIBundle _validateWithError:]"; LegacyErrorString = PackageInspectionFailed; SourceFileLine = 64; } Event Metadata: com.apple.dt.IDERunOperationWorkerFinished : { "device_isCoreDevice" = 1; "device_model" = "iPad13,6"; "device_osBuild" = "17.4.1 (21E236)"; "device_platform" = "com.apple.platform.iphoneos"; "dvt_coredevice_version" = "355.24"; "dvt_mobiledevice_version" = "1643.100.58"; "launchSession_schemeCommand" = Run; "launchSession_state" = 1; "launchSession_targetArch" = arm64; "operation_duration_ms" = 1650; "operation_errorCode" = 1; "operation_errorDomain" = IXUserPresentableErrorDomain; "operation_errorWorker" = IDEInstallCoreDeviceWorker; "operation_name" = IDERunOperationWorkerGroup; "param_debugger_attachToExtensions" = 0; "param_debugger_attachToXPC" = 1; "param_debugger_type" = 3; "param_destination_isProxy" = 0; "param_destination_platform" = "com.apple.platform.iphoneos"; "param_diag_MainThreadChecker_stopOnIssue" = 0; "param_diag_MallocStackLogging_enableDuringAttach" = 0; "param_diag_MallocStackLogging_enableForXPC" = 1; "param_diag_allowLocationSimulation" = 1; "param_diag_checker_tpc_enable" = 1; "param_diag_gpu_frameCapture_enable" = 0; "param_diag_gpu_shaderValidation_enable" = 0; "param_diag_gpu_validation_enable" = 0; "param_diag_memoryGraphOnResourceException" = 0; "param_diag_queueDebugging_enable" = 1; "param_diag_runtimeProfile_generate" = 0; "param_diag_sanitizer_asan_enable" = 0; "param_diag_sanitizer_tsan_enable" = 0; "param_diag_sanitizer_tsan_stopOnIssue" = 0; "param_diag_sanitizer_ubsan_stopOnIssue" = 0; "param_diag_showNonLocalizedStrings" = 0; "param_diag_viewDebugging_enabled" = 1; "param_diag_viewDebugging_insertDylibOnLaunch" = 1; "param_install_style" = 2; "param_launcher_UID" = 2; "param_launcher_allowDeviceSensorReplayData" = 0; "param_launcher_kind" = 0; "param_launcher_style" = 99; "param_launcher_substyle" = 8192; "param_runnable_appExtensionHostRunMode" = 0; "param_runnable_productType" = "com.apple.product-type.application"; "param_structuredConsoleMode" = 1; "param_testing_launchedForTesting" = 0; "param_testing_suppressSimulatorApp" = 0; "param_testing_usingCLI" = 0; "sdk_canonicalName" = "iphoneos17.4"; "sdk_osVersion" = "17.4"; "sdk_variant" = iphoneos; } System Information macOS Version 14.3.1 (Build 23D60) Xcode 15.3 (22618) (Build 15E204a) Timestamp: 2024-04-15T18:01:23-04:00

Hi, The goal is the move an element based on an input matrix using timer to trigger changes in the position. Say we have 2 positions, an input matrix and the element that is to be moved defined: import SwiftUI import Foundation // Positions struct PositionConstants { static let pos_1 = CGPoint(x: 155, y: 475) static let pos_2 = CGPoint(x: 135, y: 375) } // Input Matrix struct Input { static let input_1: [[Int]] = [ [ 1, 1, 0, 0, 0, 0, 0, 0, 0 ], [ 0, 0, 0, 0, 0, 0, 0, 0, 0 ], [ 0, 0, 0, 0, 0, 0, 0, 0, 0 ], [ 0, 0, 0, 0, 0, 0, 0, 0, 0 ], [ 1, 0, 1, 0, 0, 0, 0, 0, 0 ], [ 0, 0, 0, 0, 0, 0, 0, 0, 0 ], [ 0, 0, 0, 0, 0, 0, 0, 0, 0 ], [ 0, 0, 0, 0, 0, 0, 0, 0, 0 ], ] } // Element Class class Element: ObservableObject { let imageName: String let name: String let size: CGSize @Published var position: CGPoint init(imageName: String, name: String, size: CGSize, position: CGPoint) { self.imageName = imageName self.name = name self.size = size self.position = position } } Moving the element without a function works perfectly fine: struct Pos_View: View { @ObservedObject var element_1 = Element(imageName: "pic_1", name: "", size: CGSize(width: 100, height: 100), position: PositionConstants.pos_1) let Input_Matrix = Input.input_1 // Index to track current row in matrix @State private var currentIndex = 0 // Timer to trigger updates private let timer = Timer.publish(every: 1.0, on: .main, in: .common).autoconnect() var body: some View { VStack { // Display element Image(element_1.imageName) .resizable() .frame(width: element_1.size.width, height: element_1.size.height) .position(element_1.position) .onReceive(timer) { _ in // Update element position based on matrix if currentIndex < Input_Matrix.count { let isFirstElementOne = Input_Matrix[currentIndex][0] == 1 let newPosition = isFirstElementOne ? PositionConstants.pos_2 : PositionConstants.pos_1 withAnimation { element_1.position = newPosition } currentIndex += 1 } else { // Stop the timer when we reach the end of the matrix timer.upstream.connect().cancel() } } } } } struct ContentView: PreviewProvider { static var previews: some View { Pos_View() } } But when using a function to trigger the animation, I get the error "Cannot use mutating member on immutable value: 'self' is immutable" when calling the function using a button: struct Pos_View: View { @ObservedObject var element_1 = Element(imageName: "pic_1", name: "", size: CGSize(width: 100, height: 100), position: PositionConstants.pos_1) let Input_Matrix = Input.input_1 // Index to track current row in matrix @State var currentIndex = 0 // Timer to trigger updates private var timer: Timer? var body: some View { VStack { // Display element Image(element_1.imageName) .resizable() .frame(width: element_1.size.width, height: element_1.size.height) .position(element_1.position) // Button to start animation Button("Start Animation") { startAnimation() } } } mutating func startAnimation() { currentIndex = 0 // Reset index before starting animation timer = Timer.scheduledTimer(withTimeInterval: 1.0, repeats: true) {timer in if self.currentIndex < self.Input_Matrix.count { let isFirstElementOne = self.Input_Matrix[self.currentIndex][0] == 1 let newPosition = isFirstElementOne ? PositionConstants.pos_2 : PositionConstants.pos_1 withAnimation { self.element_1.position = newPosition } self.currentIndex += 1 } else { // Stop the timer when we reach the end of matrix timer.invalidate() } } } } struct ContentView: PreviewProvider { static var previews: some View { Pos_View() } } The function is defined as mutating and the element as as @ObservedObject. Anyone has a clue?

Hi Folks, We have a few local network sources for example a (NAS) with a hostname "NAS.local" and some printers where i want to do IPPS printing with "printerX.local" For transport security i want to use SSL, but i don't want to have the frequent management so i want certificates to be valid as long as possible. After trying, i found out that on iOS client devices self-signed certificates does not work at all (cannot be trusted) without a CA. To solve this, i created an own CA (10 year valid), tried and signed a lot of certificates for testing and found out that iOS can trust signed certificates with a maximum validity of 800 days! I found an Apple Link that is describing the maximum validity of 398 days except for certificates from a own CA's. Can someone refer me to the documentation that is explaining the 800 days limit?

Hi, I have tried multiple times over the past 3 weeks to enrol on multiple different devices and on the web but keep getting this error message "Your enrollment in the Apple Developer Program could not be completed at this time." It is becoming massively frustrating because I have reloaded payment details on my Apple ID and I have tried different devices as well as the web and nothing works. Apple also isn't responding to my tickets and each time I have tried I have sent an email asking for them to assist. Does anyone know how to resolve this?

I have a repeating timer installed like this: _cmdTimer = [NSTimer timerWithTimeInterval: 0.5 target: self selector: @selector(timedTask:) userInfo: nil repeats: YES]; [NSRunLoop.mainRunLoop addTimer: _cmdTimer forMode: NSModalPanelRunLoopMode]; [NSRunLoop.mainRunLoop addTimer: _cmdTimer forMode: NSDefaultRunLoopMode]; The first time the timer fires, it opens a modal dialog. But then the timer does not fire again until the dialog is closed. I don't get that, since I scheduled the timer in NSModalPanelRunLoopMode. To verify that the dialog was running in that mode, just before opening the dialog I said [self performSelector: @selector(testMe) withObject: nil afterDelay: 0.7 inModes: @[NSModalPanelRunLoopMode] ]; and the testMe method did get executed while the dialog was open.

I want to have a list of tasks and each task have a list of navigationLinks each NavigationLink has subtaskName as a label and subtaskDetails as destination and every List (tasks list and subtasks list) has .onDelete and .onMove behaviors But when I implement the code below the navigationLink act weird. navigationLink inside List inside List is not navigating when clicked and it is only triggered and navigates to SubtaskDetailView when clicking the outer List row. How can I fix this problem? import SwiftUI struct ContentView: View { @State private var tasks: [Task] = [ Task(name: "Task 1", subtasks: [ Subtask(name: "Subtask 1", details: "Details for Subtask 1"), Subtask(name: "Subtask 2", details: "Details for Subtask 2") ]), Task(name: "Task 2", subtasks: [ Subtask(name: "Subtask 1", details: "Details for Subtask 1"), Subtask(name: "Subtask 2", details: "Details for Subtask 2") ]), Task(name: "Task 3", subtasks: [ Subtask(name: "Subtask 1", details: "Details for Subtask 1"), Subtask(name: "Subtask 2", details: "Details for Subtask 2") ]) ] var body: some View { NavigationView { List { ForEach(tasks.indices, id: \.self) { index in TaskView(task: $tasks[index]) } .onDelete(perform: deleteTask) .onMove(perform: moveTask) } .navigationTitle("Tasks") .toolbar { EditButton() } } } private func deleteTask(at offsets: IndexSet) { tasks.remove(atOffsets: offsets) } private func moveTask(from source: IndexSet, to destination: Int) { tasks.move(fromOffsets: source, toOffset: destination) } } struct TaskView: View { @Binding var task: Task var body: some View { List { Text(task.name) .font(.headline) .padding(.bottom, 4) ForEach(task.subtasks.indices, id: \.self) { index in NavigationLink(destination: SubtaskDetailView(details: task.subtasks[index].details)) { Text(task.subtasks[index].name) } } .onDelete(perform: { indexSet in task.subtasks.remove(atOffsets: indexSet) }) .onMove(perform: { indices, newOffset in task.subtasks.move(fromOffsets: indices, toOffset: newOffset) }) } .frame(minHeight: CGFloat(task.subtasks.count) * 80) } } struct SubtaskDetailView: View { let details: String var body: some View { Text(details) .navigationTitle("Subtask Details") } } struct Task: Identifiable { let id = UUID() var name: String var subtasks: [Subtask] } struct Subtask: Identifiable { let id = UUID() var name: String var details: String } Thanks!

Hi Folks, I would like it so that when I press the button on the HomeScreen, the TabView hides and the toolbar item appears in its place. Currently, the toolbar item stacks on top of the TabView. However, when I try to hide the TabView, with an if condition for example, the screens turn black. I think it's because of the screen calls in the TabView. Is there an option to achieve what I want? I'm new to SwiftUI, so I'm very glad for any Solutions or advices. struct NavBar: View { var body: some View { TabView { HomeScreen() .tabItem { Label( "Home", systemImage: "house" ) } ... } } } struct HomeScreen: View { @State private var showDeleteButton = false var body: some View { Button("Show/Dissmiss Delete Button", action: { showDeleteButton.toggle() }).toolbar { if showDeleteButton { ToolbarItem(placement: .bottomBar) { Button("Delete", action: {}) } } } } }

We have been using the Weather Kit without any issues for the past year and a half. However, recently we have encountered a recurring problem with the WeatherKIT API. It has been responding with {"reason": "NOT_ENABLED"} for every request made. Last Saturday, I created a new Service ID, and it resolved the issue temporarily. However, today it started responding with {"reason": "NOT_ENABLED"} again. What steps should I take to resolve this issue?

I am unable to view my app in testflight. i can see in apple connect but not in testflight. when i try to click the email link for update on in the app, I get the error that "cannot load app"

We have an app with a web extension for Safari. We developed this app for a couple of years. Recently when we pushed an update to TestFlight or the Mac App Store, the user that updated the app, there's the dialog from macOS that asks to : Close Safari to continue the update. Click on continue to quit "safari" … It seems a recent change. Is there a way to prevent quitting Safari when we push to update to TestFlight and Mac App Store?

Struggling for weeks to publish a new update of my app, which includes the first-time submission of a subscription with auto-renewal. It's constantly being rejected due to the following issue: We have started the review of your app, but we are still not able to continue because we cannot locate the in-app purchases within your app at this time. Next Steps To help us proceed with the review of your app, please reply to this message providing the steps for locating the in-app purchases in your app. If you are restricting access to in-app purchases based on factors such as storefront or device configurations, please include this information in your reply along with steps to enable the in-app purchases for our review. No further information is provided, no communication on the steps being taken by Apple. Additionally, I have already provided a comprehensive description during submission on how to access the In-App Purchase (IAP) as text and video. What's kind of interesting: the app got rejected, but the related subscription is still in state "waiting for review". Has anyone else experienced a similar issue?

What happens if I submit an app and one of the third party libraries (but not in the big list of common third party libraries) in my app has errors in its privacy manifest? Does my app get rejected? Or does Apple go after the third party to fix their library? The error is simple enough. They simply failed to include the NSPrivacyCollectedDataTypes key. Actually, it is missing other keys but the error report probably stopped at the first one. The error is from Xcode > Window > Organizer > Archives > command click an archive from the list > Generate Privacy Report. The exact text of the error in that report is: Errors Encountered Missing an expected key: 'NSPrivacyCollectedDataTypes' I am not concerned with how to fix the syntax. I know that much. I want to know what Apple will do if I submit the app for review with the errors present in the third party lib. There are verbal rumors and speculation that Apple contacts third party library devs and leave app devs alone if a library messes up its privacy file, but I cannot find any confirmation of this on the Internet. And again, while this lib is from medium size commercial vendor, it is not common enough to be on Apple's list.

Copying from https://github.com/google/jax/issues/20750: import jax import jax.numpy as jnp def test_func(x, y): return x, y def main(): # Print available JAX devices print("JAX devices:", jax.devices()) # Create two random matrices a = jnp.array([[1.0, 2.0], [3.0, 4.0]]) b = jnp.array([[5.0, 6.0], [7.0, 8.0]]) # Perform matrix multiplication c = jnp.dot(a, b) # Print the result print("Result of matrix multiplication:") print(c) # Compute the gradient of sum of c with respect to a grad_a = jax.grad(lambda a: jnp.sum(jnp.dot(a, b)))(a) print("Gradient with respect to a:") print(grad_a) rng = jax.random.PRNGKey(0) test_input = jax.random.normal(key=rng, shape=(5,5,5)) initial_state = jax.numpy.array(0.0) x, y = jax.lax.scan(test_func, initial_state, test_input) if __name__ == "__main__": main() Gets: Platform 'METAL' is experimental and not all JAX functionality may be correctly supported! 2024-04-15 18:22:28.994752: W pjrt_plugin/src/mps_client.cc:563] WARNING: JAX Apple GPU support is experimental and not all JAX functionality is correctly supported! Metal device set to: Apple M2 Pro systemMemory: 16.00 GB maxCacheSize: 5.33 GB JAX devices: [METAL(id=0)] Result of matrix multiplication: [[19. 22.] [43. 50.]] Gradient with respect to a: [[11. 15.] [11. 15.]] zsh: segmentation fault python JAXTest.py With more info from the debugger: Current thread 0x00000001fdd3bac0 (most recent call first): File "/Users/.../anaconda3/lib/python3.11/site-packages/jax/_src/interpreters/pxla.py", line 1213 in __call__ My configuration is: jax-metal : 0.0.6 jax: 0.4.26 jaxlib: 0.4.23 numpy: 1.24.3 python: 3.11.8 | packaged by conda-forge | (main, Feb 16 2024, 20:49:36) [Clang 16.0.6 ] jax.devices (1 total, 1 local): [METAL(id=0)] process_count: 1 platform: uname_result(system='Darwin', root:xnu-10063.101.17~1/RELEASE_ARM64_T6020', machine='arm64') macOS 14.4.1 (23E224) Before in 3.9+0.0.3 etc it wasn't happening.

Hi, I have encountered to a segfault error when I called something via jax.lax.scan. A minimum failing example is pasted below: $ ipython Python 3.9.6 (default, Feb 3 2024, 15:58:27) Type 'copyright', 'credits' or 'license' for more information IPython 8.18.1 -- An enhanced Interactive Python. Type '?' for help. In [1]: import jax In [2]: jax.__version__ Out[2]: '0.4.22' In [3]: import jaxlib In [4]: jaxlib.__version__ Out[4]: '0.4.22' In [6]: import jax.numpy as jnp In [7]: def f(carry, x): ...: return carry + x * x, x * x ...: ...: jax.lax.scan(f, jnp.zeros((), dtype=jnp.float32), jnp.arange(3, dtype=jnp.float32)) Platform 'METAL' is experimental and not all JAX functionality may be correctly supported! 2024-04-16 01:03:52.483015: W pjrt_plugin/src/mps_client.cc:563] WARNING: JAX Apple GPU support is experimental and not all JAX functionality is correctly supported! Metal device set to: Apple M3 Max systemMemory: 36.00 GB maxCacheSize: 13.50 GB zsh: segmentation fault ipython This might be related to the thread below: https://developer.apple.com/forums/thread/749080 Strangely, when we call it jax.lax.scan is a very important building block, so I would greatly appreciate if this can be resolved soon.

We are facing a weird behaviour when implementing the AirPlay functionality of our iOS app. When we test our app on Apple TV devices everything works fine. On some smart TVs with a specific AirPlay receiver version, (more details below) the stream gets stuck on buffering state immediately after switching to AirPlay mode. On other smart TVs, with different AirPlay receiver version, everything works as expected. The interesting part is that other free or DRM protected streams, work fine on all devices. Smart TVs that AirPlay works fine AirPlay Version -> 25.06 (19.9.9) Smart TVs that AirPlay stuck at buffering state: AirPlayReceiverSDKVersion -> 3.3.0.54 AirPlayReceiverAppVersion -> 53.122.0 You can reproduce this issue using the following stream url: https://tr.vod.cdn.cosmotetvott.gr/v1/310/668/1674288197219/1674288197219.ism/.m3u8?qual=a&ios=1&hdnts=st=1713194669\~exp=1713237899\~acl=\*/310/668/1674288197219/1674288197219.ism/\*\~id=cab757e3-9922-48a5-988b-3a4f5da368b6\~data=de9bbd0100a8926c0311b7dbe5389f7d91e94a199d73b6dc75ea46a4579769d7~hmac=77b648539b8f3a823a7d398d69e5dc7060632c29 If this link expires, notify me to send a new one for testing. Could you please provide to us any specific suggestion as to what causes this issue on those specific streams?

Hello, Trying to upload build to AppStore but reciving ITMS-90809: Deprecated API Usage. We have tried all possible solutions i think. Searching some help and advice here. All help is appreciated. cmd + shift + f) to find if UIWebView command grep -r "UIWebView". Searched out in the code. There is no web view WKwebview is used in every file ITMS-90809: Deprecated API Usage - New apps that use UIWebView are no longer accepted. Instead, use WKWebView for improved security and reliability. Learn more (https://developer.apple.com/documentation/uikit/uiwebview).